A Review: Characteristics of Oil Palm Trunk (OPT) and Quality Improvement of Palm Trunk Plywood by Resin Impregnation

by Fauhan Rosli, Che Mohd Ruzaidi Ghazali, Mohd Mustafa Al Bakri Abdullah, Kamarudin Hussin
Published 2016-03-01

XRD and TG-DTA Study of New Alkali Activated Materials Based on Fly Ash with Sand and Glass Powder

by Dumitru Doru Burduhos Nergis, Mohd Mustafa Al Bakri Abdullah, Andrei Victor Sandu, Petrică Vizureanu
Published 2020-01-01

STUDY ON CHARACTERISTICS MODIFICATION OF RUL 1 STEEL

by Dragos Cristian ACHITEI, Mohd Mustafa Al Bakri ABDULLAH, Mirabela Georgiana MINCIUNĂ, Manuela Cristina PERJU
Published 2017-12-01

Mechanical and Microstructural Evaluations of Lightweight Aggregate Geopolymer Concrete before and after Exposed to Elevated Temperatures

by Mohammed Binhussain, Khairul Nizar Ismail, Kamarudin Hussin, Mohd Mustafa Al Bakri Abdullah, Omar A. Abdulkareem
Published 2013-10-01

LADLE FURNACE SLAG REPLACEMENT ON THE FLEXURAL STRENGTH OF THIN FLY ASH GEOPOLYMER

by Ng YONG-SING, Liew YUN-MING, Mohd Mustafa Al Bakri ABDULLAH, Ng HUI-TENG, Ridho BAYUAJI
Published 2020-09-01

GEOPOLYMER CONCRETE STEEL BAR REINFORCEMENT RESPONSE AGAINST EXPLOSIVE AIR BLAST

by Nurul Aida Mohd MORTAR, Kamarudin HUSSIN, Rafiza RAZAK, Mohd Mustafa Al Bakri ABDULLAH, Ahmad H HILMI
Published 2018-09-01

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

by Rafiza Abdul Razak, Zarina Yahya, Khairul Nizar Ismail, Mohd Mustafa Al Bakri Abdullah, Mohamed Bnhussain, Kamarudin Hussin
Published 2012-06-01

Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to Produce Lightweight Aggregate-Based Geopolymer

by Rafiza Abdul Razak, Mohd Mustafa Al Bakri Abdullah, Kamarudin Hussin, Khairul Nizar Ismail, Djwantoro Hardjito, Zarina Yahya
Published 2015-05-01

Fly Ash Porous Material using Geopolymerization Process for High Temperature Exposure

by Mohd Izzat Ahmad, Che Mohd Ruzaidi Ghazali, Mohamed Bnhussain, Kamarudin Hussin, Liyana Jamaludin, Mohd Mustafa Al Bakri Abdullah
Published 2012-04-01

The Effect of Various Waste Materials’ Contents on the Attenuation Level of Anti-Radiation Shielding Concrete

by Rafiza Abdul Razak, Andrei Victor Sandu, Kahtan S. Mohammed, Kamarudin Hussin, Mohd Mustafa Al Bakri Abdullah, Ali Basheer Azeez
Published 2013-10-01

Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System

by Zarina Yahya, Mohd Mustafa Al Bakri Abdullah, Kamarudin Hussin, Khairul Nizar Ismail, Rafiza Abd Razak, Andrei Victor Sandu
Published 2015-04-01

The Effects of Various Concentrations of NaOH on the Inter-Particle Gelation of a Fly Ash Geopolymer Aggregate

by Alida Abdullah, Kamarudin Hussin, Mohd Mustafa Al Bakri Abdullah, Zarina Yahya, Wojciech Sochacki, Rafiza Abdul Razak, Katarzyna Błoch, Hamzah Fansuri
Published 2021-02-01

Influences of SiO2, Al2O3, CaO and MgO in phase transformation of sintered kaolin-ground granulated blast furnace slag geopolymer

by Noorina Hidayu Jamil, Mohd. Mustafa Al Bakri Abdullah, Faizul Che Pa, Hasmaliza Mohamad, Wan Mohd Arif W. Ibrahim, Jitrin Chaiprapa
Published 2020-11-01

Evaluation on the rheological and mechanical properties of concrete incorporating eggshell with tire powder

by Rokiah Othman, Beng Wei Chong, Ramadhansyah Putra Jaya, Mohd Rosli Mohd Hasan, Mohd Mustafa Al Bakri Abdullah, Mohd Haziman Wan Ibrahim
Published 2021-09-01

Microstructure and porosity evolution of alkali activated slag at various heating temperatures

by Ikmal Hakem Aziz, Mohd Mustafa Al Bakri Abdullah, M.A.A. Mohd Salleh, Sorachon Yoriya, Jitrin Chaiprapa, Catleya Rojviriya, Long Yuan Li
Published 2020-11-01

Enhancement of mechanical and thermal properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition

by Muhammad Razlan Zakaria, Hazizan Md Akil, Mohd Firdaus Omar, Muhammad Helmi Abdul Kudus, Fatin Nur Amirah Mohd Sabri, Mohd Mustafa Al Bakri Abdullah
Published 2020-11-01

Formulation, mechanical properties and phase analysis of fly ash geopolymer with ladle furnace slag replacement

by Ng Hui-Teng, Heah Cheng-Yong, Liew Yun-Ming, Mohd Mustafa Al Bakri Abdullah, Kong Ern Hun, Hasniyati Md Razi, Ng Yong-Sing
Published 2021-05-01

The Effect of Thermal Annealing on the Microstructure and Mechanical Properties of Sn-0.7Cu-xZn Solder Joint

by Mohd Izrul Izwan Ramli, Mohd Arif Anuar Mohd Salleh, Rita Mohd Said, Mohd Mustafa Al Bakri Abdullah, Dewi Suriyani Che Halin, Norainiza Saud, Marcin Nabiałek
Published 2021-02-01

Phase Transformation of Kaolin-Ground Granulated Blast Furnace Slag from Geopolymerization to Sintering Process

by Noorina Hidayu Jamil, Mohd. Mustafa Al Bakri Abdullah, Faizul Che Pa, Mohamad Hasmaliza, Wan Mohd Arif W. Ibrahim, Ikmal Hakem A. Aziz, Bartłomiej Jeż, Marcin Nabiałek
Published 2021-02-01

Role of Sintering Temperature in Production of Nepheline Ceramics-Based Geopolymer with Addition of Ultra-High Molecular Weight Polyethylene

by Romisuhani Ahmad, Mohd Mustafa Al Bakri Abdullah, Wan Mastura Wan Ibrahim, Kamarudin Hussin, Fakhryna Hannanee Ahmad Zaidi, Jitrin Chaiprapa, Jerzy J. Wysłocki, Katarzyna Błoch, Marcin Nabiałek
Published 2021-02-01