Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control
High-bandwidth fuel modulation is currently one of the most promising methods for active combustion control. To attenuate the large pressure oscillations in the combustion chamber, the fuel is pulsed so that the heat release rate fluctuations damp the pressure oscillations in the combustor. This the...
Main Author: | |
---|---|
Other Authors: | |
Format: | Others |
Published: |
Virginia Tech
2011
|
Subjects: | |
Online Access: | http://hdl.handle.net/10919/9843 http://scholar.lib.vt.edu/theses/available/etd-10142003-151535 |
id |
ndltd-VTETD-oai-vtechworks.lib.vt.edu-10919-9843 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-VTETD-oai-vtechworks.lib.vt.edu-10919-98432020-09-29T05:41:42Z Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control Schiller, Noah Harrison Mechanical Engineering Saunders, William R. Baumann, William T. Vandsburger, Uri proportional fuel injection piezoelectric actuator fuel modulation active combustion control high-bandwidth valve High-bandwidth fuel modulation is currently one of the most promising methods for active combustion control. To attenuate the large pressure oscillations in the combustion chamber, the fuel is pulsed so that the heat release rate fluctuations damp the pressure oscillations in the combustor. This thesis focuses on the development and implementation of a high-bandwidth, proportional modulation system for liquid-fuel active combustion control. The throttle valve modulation system, discussed in this thesis, uses a 500-um piezoelectric stack coupled with an off-the-shelf valve. After comparing three other types of actuators, the piezoelectric stack was selected because of its compact size, bandwidth capabilities, and relatively low cost. Using the acoustic resonance of the fuel line, the system is able to achieve 128% pressure modulation, relative to the mean pressure, and is capable of producing more than 75% flow modulation at 115 Hz. Additionally, at 760 Hz the system produces 40% pressure modulation and 21% flow modulation with flow rates between 0.4 and 10 gph. Control authority was demonstrated on a single-nozzle kerosene combustor which exhibits a well-pronounced instability at ~115 Hz. Using the modulation system, the fundamental peak of the combustion instability was reduced by 30 dB, and the broadband sound pressure levels inside the combustor were reduced by 12 dB. However, the most important conclusion from the combustion control experiments was not the system?s accomplishments, but rather its inability to control the combustor at high global equivalence ratios. Our work indicates that having the ability to modulate a large percentage of the primary fuel is not always sufficient for active combustion control. Master of Science 2011-08-06T15:58:25Z 2011-08-06T15:58:25Z 2003-10-08 2003-10-14 2003-10-16 2003-10-16 Thesis etd-10142003-151535 http://hdl.handle.net/10919/9843 http://scholar.lib.vt.edu/theses/available/etd-10142003-151535 Thesis.pdf In Copyright http://rightsstatements.org/vocab/InC/1.0/ ETD application/pdf Virginia Tech |
collection |
NDLTD |
format |
Others
|
sources |
NDLTD |
topic |
proportional fuel injection piezoelectric actuator fuel modulation active combustion control high-bandwidth valve |
spellingShingle |
proportional fuel injection piezoelectric actuator fuel modulation active combustion control high-bandwidth valve Schiller, Noah Harrison Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
description |
High-bandwidth fuel modulation is currently one of the most promising methods for active combustion control. To attenuate the large pressure oscillations in the combustion chamber, the fuel is pulsed so that the heat release rate fluctuations damp the pressure oscillations in the combustor. This thesis focuses on the development and implementation of a high-bandwidth, proportional modulation system for liquid-fuel active combustion control.
The throttle valve modulation system, discussed in this thesis, uses a 500-um piezoelectric stack coupled with an off-the-shelf valve. After comparing three other types of actuators, the piezoelectric stack was selected because of its compact size, bandwidth capabilities, and relatively low cost. Using the acoustic resonance of the fuel line, the system is able to achieve 128% pressure modulation, relative to the mean pressure, and is capable of producing more than 75% flow modulation at 115 Hz. Additionally, at 760 Hz the system produces 40% pressure modulation and 21% flow modulation with flow rates between 0.4 and 10 gph. Control authority was demonstrated on a single-nozzle kerosene combustor which exhibits a well-pronounced instability at ~115 Hz. Using the modulation system, the fundamental peak of the combustion instability was reduced by 30 dB, and the broadband sound pressure levels inside the combustor were reduced by 12 dB. However, the most important conclusion from the combustion control experiments was not the system?s accomplishments, but rather its inability to control the combustor at high global equivalence ratios. Our work indicates that having the ability to modulate a large percentage of the primary fuel is not always sufficient for active combustion control. === Master of Science |
author2 |
Mechanical Engineering |
author_facet |
Mechanical Engineering Schiller, Noah Harrison |
author |
Schiller, Noah Harrison |
author_sort |
Schiller, Noah Harrison |
title |
Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
title_short |
Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
title_full |
Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
title_fullStr |
Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
title_full_unstemmed |
Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control |
title_sort |
design and validation of a proportional throttle valve system for liquid-fuel active combustion control |
publisher |
Virginia Tech |
publishDate |
2011 |
url |
http://hdl.handle.net/10919/9843 http://scholar.lib.vt.edu/theses/available/etd-10142003-151535 |
work_keys_str_mv |
AT schillernoahharrison designandvalidationofaproportionalthrottlevalvesystemforliquidfuelactivecombustioncontrol |
_version_ |
1719345530656522240 |