Effects of Heat Treatment on the Mechanical Properties of3D Printed 6-4 Titaniu Alloy
碩士 === 國立屏東科技大學 === 機械工程系所 === 106 === The elongation of the 3D printed 6-4Ti alloy by using SLM method is usually lower, because of α' lamella martensite occurred. Therefore, it is reason of increasing the toughness by heated treatment. Additionally, the amount of elongation is depended of the...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2018
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/y98qjk |