The Study of Select the Gate Design Position and the Best Molding Parameters Used in Industrial Safety Masks
碩士 === 南臺科技大學 === 機械工程系 === 105 === In this study, an industrial safety mask (280x235x130mm) was used as an analytical example. After the flow analysis, it was found that the gate position was set at the boundary of the outer side surface, and the curve of the molded product inlet pressure was stabl...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2017
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/hzyy62 |