Apply Expansion-Compression Injection Molding Technology To The Mold Design And Process Development Of Thick-Walled Parts
碩士 === 國立高雄應用科技大學 === 模具工程系碩士班 === 102 === Defect modes, such as Jetting marks, sink marks, and inner bubbles, etc.; were often found in the thick-walled parts injection molding. Direct gate type was designed to keep effective packing longer, but makes the worse appearance. This study was to investi...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2014
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/24j76w |