Development of near net shaped Si3N4/SiC composites with optimised grain boundary phase for industrial wood machining

Development of near net shaped Si3N4/SiC composites with optimised grain boundary phase for industrial wood machining

The introduction of ceramics into the market of wood cutting tools has failed so far due to the generally low toughness of ceramics which is causing brittle failure of the cutting edge. A feasibility study showed that Si3N4/SiC composites with fine elongated β-Si3N4 grains are a promising material f...

Full description

Bibliographic Details
Main Author: Strehler, Claudia
Other Authors: TU Bergakademie Freiberg, Maschinenbau, Verfahrens- und Energietechnik
Format: Doctoral Thesis
Language:English
Published: Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola" 2011
Subjects:
Keramikkomposit
Sinteradditive
Schneidewerkzeug
Holzbearbeitung
Ceramic composite
sintering additives
cutting tools
wood machining
ddc:620
Keramischer Werkstoff
Verbundwerkstoff
Sintermittel
Schneidwerkzeug
Online Access:http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-71329
http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-71329
http://www.qucosa.de/fileadmin/data/qucosa/documents/7132/Dissertation%20Claudia%20Strehler%202011.pdf

Internet

http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-71329
http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-71329
http://www.qucosa.de/fileadmin/data/qucosa/documents/7132/Dissertation%20Claudia%20Strehler%202011.pdf

Similar Items