Quantitative Biaxial Texture Analysis with Reflection High-Energy Electron Diffraction for Ion Beam-Assisted Deposition of MgO and Heteroepitaxy of Perovskite Ferroelectrics

• Main Author: Brewer, Rhett Ty
• Format: Others
• Language: en
• Published: 2004
• Online Access: https://thesis.library.caltech.edu/3160/1/ThesisFinalDefended.pdf; Brewer, Rhett Ty (2004) Quantitative Biaxial Texture Analysis with Reflection High-Energy Electron Diffraction for Ion Beam-Assisted Deposition of MgO and Heteroepitaxy of Perovskite Ferroelectrics. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/J5PY-RS79. https://resolver.caltech.edu/CaltechETD:etd-08182003-150957 <https://resolver.caltech.edu/CaltechETD:etd-08182003-150957>

<p>To facilitate ferroelectric-based actuator integration with silicon electronics fabrication technology, we have developed a route to produce biaxially textured ferroelectrics on amorphous layers by using biaxially textured MgO templates.</p> <p>Using a kinematical electron scattering model, we show that the RHEED pattern from a biaxially textured polycrystalline film can be calculated from an analytic solution to the electron scattering probability. We found that diffraction spot shapes are sensitive to out-of-plane orientation distributions and in-plane RHEED rocking curves are sensitive to the in-plane orientation distribution. Using information from the simulation, a RHEED-based experimental technique was developed for in situ measurement of MgO biaxial texture. The accuracy of this technique was confirmed by comparing RHEED measurements of in-plane and out-of-plane orientation distribution with synchrotron x-ray rocking curve measurements.</p> <p>Biaxially textured MgO was grown on amorphous Si3N4 by ion beam-assisted deposition (IBAD). MgO was e-beam evaporated onto the amorphous substrate with a simultaneous 750-1200 eV Ar⁺ ion bombardment at 45° from normal incidence. We observed a previously unseen, dramatic texture evolution in IBAD MgO using transmission electron microscopy (TEM) and RHEED-based quantitative texture measurements of MgO. The first layers of IBAD MgO are diffraction amorphous until the film is about 3.5 nm thick. During the next 1 nm of additional growth, we observed rapid biaxial texture evolution. RHEED and TEM studies indicate that biaxially textured MgO film results from a solid phase crystallization of biaxially textured MgO crystals in an amorphous matrix.</p> <p>Biaxially textured perovskite ferroelectrics were grown on biaxially textured MgO templates using sol-gel, metallorganic chemical vapor deposition (MOCVD), and molecular beam epitaxy (MBE). Through RHEED-based biaxial texture analysis we observed that the heteroepitaxial ferroelectric in-plane orientation distribution, deposited using ex situ techniques (not performed in the same high vacuum growth environment where the MgO was deposited), narrowed significantly with respect to the in-plane orientation distribution of its MgO template (from 11° to 6° FWHM). Evidence from cross section TEM and RHEED suggest that atmospheric moisture degrades the crystallinity of highly defective, misaligned MgO grains and that heteroepitaxially grown ferroelectrics preferentially nucleate on well-aligned grains and over grow misaligned regions of MgO.</p>