FEM Analysis of Punching-Process in Consideration of Micro Die Wear
Detailed punching-process analysis is difficult because the punch diameter, sheet thickness, clearance, and die wear of the punching-process are approximately 10 mm, 1 mm, 100 μm, and 10 μm, respectively. Furthermore, such analyses have rarely considered die wear. Therefore, in the present study, we...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2016-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | http://dx.doi.org/10.1051/matecconf/20168015006 |