Finite Element Analyzing the Influence of Cutting HT250 by Self-prepared Si<sub>3</sub>N<sub>4</sub> Insert with Different Cutting Depth
Based on the properties parameters of the self-prepared Si3N4 insert and HT250, the simulation models were created. Using these models, the results of cutting force, temperature and tool stress were availably obtained with different cutting depth. It was concluded by these results that the cutting f...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
AIDIC Servizi S.r.l.
2017-07-01
|
| Series: | Chemical Engineering Transactions |
| Online Access: | https://www.cetjournal.it/index.php/cet/article/view/1081 |