A Geometric Modeling and Computing Method for Direct Kinematic Analysis of 6-4 Stewart Platforms
A geometric modeling and solution procedure for direct kinematic analysis of 6-4 Stewart platforms with any link parameters is proposed based on conformal geometric algebra (CGA). Firstly, the positions of the two single spherical joints on the moving platform are formulated by the intersection, dis...
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2018-01-01
|
| Series: | Mathematical Problems in Engineering |
| Online Access: | http://dx.doi.org/10.1155/2018/6245341 |
| Summary: | A geometric modeling and solution procedure for direct kinematic analysis of 6-4 Stewart platforms with any link parameters is proposed based on conformal geometric algebra (CGA). Firstly, the positions of the two single spherical joints on the moving platform are formulated by the intersection, dissection, and dual of the basic entities under the frame of CGA. Secondly, a coordinate-invariant equation is derived via CGA operation in the positions of the other two pairwise spherical joints. Thirdly, the other five equations are formulated in terms of geometric constraints. Fourthly, a 32-degree univariate polynomial equation is reduced from a constructed 7 by 7 matrix which is relatively small in size by using a Gröbner-Sylvester hybrid method. Finally, a numerical example is employed to verify the solution procedure. The novelty of the paper lies in that (1) the formulation is concise and coordinate-invariant and has intrinsic geometric intuition due to the use of CGA and (2) the size of the resultant matrix is smaller than those existed. |
|---|---|
| ISSN: | 1024-123X 1563-5147 |