Fabrication and Machining Performance of Powder Compacted Alumina Based Cutting Tool
This study focuses on the fabrication of alumina based cutting tool for machining application. Specific weight of alumina powders were pressed in a mold using hydraulic press at 8 tons before compressed through Cold Isostatic Press (CIP) at 30000 psi. Green body then was dried and sintered at 1700 °...
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2018-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | https://doi.org/10.1051/matecconf/201815004009 |