Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes

by Rasouli Moien, Mohammad Layeghi, Saber Lotfi
Published 2011-12-01

Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading

by Hamideh Abdolzadeh, Ghanbar Ebrahimi, Mohammad Layeghi
Published 2016-03-01

Minimizing hot-press time in the manufacturing process of wood plastic composites

by Nazanin Motie, Ghanbar Ebrahimi, Mehdi Tajvidi, Mohammad Layeghi
Published 2013-11-01

Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furni...

by Mosayeb Dalvand, Ghanbar Ebrahimi, Mehdi Tajvidi, Mohammad Layeghi
Published 2013-03-01

Effect of Graphite powder on thermal conductivity, physical and mechanical properties of 3-layer particleboard

by Amin Malekani, Kazem Dousthosseini, Mehdi Faezipour, Mohammad Layeghi
Published 2013-11-01

Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and pa...

by Sadegh Maleki, Mehdi Faezipour, Ghanbar Ebrahimi, Mohammad Layeghi
Published 2014-11-01

Study of Stress Capacity Improvement of L-type Joint by Chemical Modification of Wood

by Hamideh Abdolzadeh, Mohammad Layeghi, Ghanbar Ebrahimi, Mehdi Ghassemie
Published 2014-07-01

The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth

by Sadegh Maleki, Mahdi Faezipour, Ghanbar Ebrahimi, Mohammad Layeghi
Published 2013-11-01

The effect of layer’s moisture content and pre-heating by microwave radiation on physical and mechanical properties of laminated veneer lumber

by Mohammad Farajallahpour, mohammad layeghi, kazem Dosthosseini, hanidreza edalat
Published 2017-05-01

Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members

by Sadegh Maleki, Mohammad Mehdei Faezipour, Ghanbar Ebrahimi, mohammad Layeghi
Published 2012-12-01

Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite

by Foroogh Dastoorian, Mohammad Layeghi, Ghanbar Ebrahimi, Mahdi Tajvidi, Majid Zabihzadeh
Published 2014-11-01

Mechanical properties of Beech -Furfuryl alcohol wood polymer

by Hamideh Abdolzadeh, Ghanbar Ebrahimi, Mohammad Layeghi, Mahdi Ghasemieh, Ahmad Mirshokrai
Published 2013-11-01

Evaluation of bending performance for cross laminated timber (CLT) made out of poplar (Populus alba)

by akbar Rostampour Haftkhani1, mohammad layeghi, ghanbar ebrahimi, kambiz Pourtahmasi
Published 2017-05-01

Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation

by Mohammad Arabi, Mohammad mehdi Faezipoor, Mohammad Layeghi, Ali akbar Enayati
Published 2011-09-01

Evaluation of the refining effects on the properties of transparent paper produced from bagasse fiber

by farzaneh shiralizadeh, mohammad azadfallah, ali Abdolkhani, mohammad Layeghi, saeed mahdavi
Published 2014-09-01

Creep rupture behavior of a bagasse fiber-polypropylene composite

by foroogh dastoorian, Mohammad Layeghi, Ghanbar Ebrahimi, Mehdi Tajvidi, Seid Majid Zabihzadeh
Published 2016-12-01

Fracture Behavior of Beech-Furan Wood Polymer under Mode I

by Hamideh Abdolzadeh, Ghanbar Ebrahimi, Mohammad Layeghi, Mehdi Ghasemieh, Seiad Ahmad Mirshokraei
Published 2014-12-01

Investigation on lateral load of joints made with various screws on commercial wood-plastic composite

by Akbar Rostampoor haftkhani, Ghanbar Ebrahimi, Mohammad Arabi, Mehdi Tajvidi, Mohammad Layeghi
Published 2012-03-01

Influence of elevated temperature on flexural behavior of a bagasse fiber-polypropylene composite assessed by moment curvature analysis method

by Foroogh Dastoorian, mohammad layeghi, ghanbar ebrahimi, mahdi tajvidi, seyed majid zabihzadeh
Published 2015-11-01

Investigation on the performance of solar kiln for wood drying in different seasons in Karaj

by asghar tarmian, Seaid Alireza Dehghan, Elnaz Trighnoor, Mohammad reza Pyramon, Razyeh Shamsy, Mohammad Layeghi
Published 2016-09-01