Residual Stresses Analysis Methodology During Cyclic Plastic Deformation Carbon Steel

by Vladislav OCHODEK, Stanislav RUSZ
Published 2016-12-01

Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys

by Ondřej Hilšer, Stanislav Rusz, Radek čada, Michal Salajka, Jan Dutkiewicz
Published 2016-09-01

Use of Numerical Simulation at Optimisation of Technological Processes of Cold Bulk Forming

by Stanislav RUSZ, Stanislav TYLŠAR, Jan KEDROŇ, Michal SALAJKA, Tomáš BRUMAR
Published 2012-06-01

Full-Field Temperature Measurement of Stainless Steel Specimens Subjected to Uniaxial Tensile Loading at Various Strain Rates

by Krzysztof Żaba, Tomasz Trzepieciński, Stanislav Rusz, Sandra Puchlerska, Maciej Balcerzak
Published 2021-09-01

On the Zener–Hollomon Parameter, Multi-Layer Perceptron and Multivariate Polynomials in the Struggle for the Peak and Steady-State Description

by Petr Opěla, Petr Kawulok, Ivo Schindler, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil
Published 2020-10-01

SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING

by Jan Dutkiewicz, Stanislav Rusz, Dariusz Kuc, Ondrej Hilser, Paweł Pałka, Grzegorz Boczkal
Published 2017-09-01

Flow Stress and Hot Deformation Activation Energy of 6082 Aluminium Alloy Influenced by Initial Structural State

by Ivo Schindler, Petr Kawulok, Vladivoj Očenášek, Petr Opěla, Rostislav Kawulok, Stanislav Rusz
Published 2019-11-01

On various multi-layer perceptron and radial basis function based artificial neural networks in the process of a hot flow curve description

by Petr Opěla, Ivo Schindler, Petr Kawulok, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil
Published 2021-09-01

Thermal, structure and phases analysis of the aluminium ENAC-AlMg5Si2Mn alloy

by Tomasz Tański, Mariusz Król, Przemysław Snopiński, Marek Tadeusz Roszak, Stanislav Rusz, Peter Palček
Published 2015-05-01

Correlation among the Power Dissipation Efficiency, Flow Stress Course, and Activation Energy Evolution in Cr-Mo Low-Alloyed Steel

by Petr Opěla, Ivo Schindler, Petr Kawulok, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil, Radek Jurča
Published 2020-08-01

Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation

by Ondřej Hilšer, Stanislav Rusz, Pavel Szkandera, Lubomír Čížek, Martin Kraus, Jan Džugan, Wojciech Maziarz
Published 2018-09-01

STRUCTURE AND PROPERTIES OF AZ31 MAGNESIUM ALLOY AFTER COMBINATION OF HOT EXTRUSION AND ECAP

by Ondřej Hilšer, Stanislav Rusz, Wojciech Maziarz, Jan Dutkiewicz, Tomasz Tański, Przemysław Snopiński, Jan Džugan
Published 2017-09-01

Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation

by Przemysław Snopiński, Tomasz Tański, Klaudiusz Gołombek, Stanislav Rusz, Ondřej Hilser, Tibor Donič, Paweł M. Nuckowski, Marcin Benedyk
Published 2020-01-01

Effects of Austenitization Temperature and Pre-Deformation on CCT Diagrams of 23MnNiCrMo5-3 Steel

by Ivo Schindler, Rostislav Kawulok, Petr Opěla, Petr Kawulok, Stanislav Rusz, Jaroslav Sojka, Michal Sauer, Horymír Navrátil, Lukáš Pindor
Published 2020-11-01

Hot Deformation Behaviour of Mn–Cr–Mo Low-Alloy Steel in Various Phase Regions

by Ivo Schindler, Petr Opěla, Petr Kawulok, Jaroslav Sojka, Kateřina Konečná, Stanislav Rusz, Rostislav Kawulok, Michal Sauer, Petra Turoňová
Published 2020-09-01

The Relationship between Nil-Strength Temperature, Zero Strength Temperature and Solidus Temperature of Carbon Steels

by Petr Kawulok, Ivo Schindler, Bedřich Smetana, Ján Moravec, Andrea Mertová, Ľubomíra Drozdová, Rostislav Kawulok, Petr Opěla, Stanislav Rusz
Published 2020-03-01

Effect of Strain on Transformation Diagrams of 100Cr6 Steel

by Rostislav Kawulok, Ivo Schindler, Jaroslav Sojka, Petr Kawulok, Petr Opěla, Lukáš Pindor, Eduard Grycz, Stanislav Rusz, Vojtěch Ševčák
Published 2020-04-01