Retentive Characteristics of a Polyetheretherketone Post-Core Restoration with Polyvinylsiloxane Attachments

by Ping Li, Dorina Hasselbeck, Alexey Unkovskiy, Feraydoon Sharghi, Sebastian Spintzyk
Published 2020-09-01

Bonding Interface and Repairability of 3D-Printed Intraoral Splints: Shear Bond Strength to Current Polymers, with and without Ageing

by Ebru Kuscu, Andrea Klink, Sebastian Spintzyk, Pablo Kraemer Fernandez, Fabian Huettig
Published 2021-07-01

Accuracy Evaluation of Additively and Subtractively Fabricated Palatal Plate Orthodontic Appliances for Newborns and Infants–An In Vitro Study

by Maite Aretxabaleta, Alexey Unkovskiy, Bernd Koos, Sebastian Spintzyk, Alexander B. Xepapadeas
Published 2021-07-01

Retention Forces of Prosthetic Clasps over a Simulated Wearing Period of Six Years In-Vitro: Direct Metal Laser Melting Versus Dental Casting

by Moritz Mutschler, Florian Schweitzer, Sebastian Spintzyk, Jürgen Geis-Gerstorfer, Fabian Huettig
Published 2020-11-01

Surface Characteristics of Milled and 3D Printed Denture Base Materials Following Polishing and Coating: An In-Vitro Study

by Pablo Kraemer Fernandez, Alexey Unkovskiy, Viola Benkendorff, Andrea Klink, Sebastian Spintzyk
Published 2020-07-01

Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report

by Alexey Unkovskiy, Eugen Wahl, Anne Teresa Zander, Fabian Huettig, Sebastian Spintzyk
Published 2019-03-01

3D Printing of Polyamide to Fabricate a Non-Metal Clasp Removable Partial Denture via Fused Filament Fabrication: A Case Report

by Sebastian Spintzyk, Roman Schmunk, Pablo Kraemer Fernandez, Fabian Huettig, Alexey Unkovskiy
Published 2021-08-01

Needle penetration test - qualifying examination of 3D printable silicones for vascular models in surgical practice

by Thore von Steuben, Christoph Salewski, Alexander B. Xepapadeas, Moritz Mutschler, Sebastian Spintzyk
Published 2021-08-01

Fracture Load of an Orthodontic Appliance for Robin Sequence Treatment in a Digital Workflow

by Maite Aretxabaleta, Alexander B. Xepapadeas, Christian F. Poets, Bernd Koos, Sebastian Spintzyk
Published 2021-01-01

The Effect of Various Plasma Gases on the Shear Bond Strength between Unfilled Polyetheretherketone (PEEK) and Veneering Composite Following Artificial Aging

by Mohamed Younis, Alexey Unkovskiy, Ashraf ElAyouti, Jürgen Geis-Gerstorfer, Sebastian Spintzyk
Published 2019-05-01

Bonding Behavior of Conventional PMMA towards Industrial CAD/CAM PMMA and Artificial Resin Teeth for Complete Denture Manufacturing in a Digital Workflow

by Dominik Klaiber, Sebastian Spintzyk, Juergen Geis-Gerstorfer, Andrea Klink, Alexey Unkovskiy, Fabian Huettig
Published 2021-07-01

Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials—A Laboratory Peel-off Study

by Yichen Xu, Alexey Unkovskiy, Felix Klaue, Frank Rupp, Juergen Geis-Gerstorfer, Sebastian Spintzyk
Published 2018-10-01

Influence of Different Framework Designs on the Fracture Properties of Ceria-Stabilized Tetragonal Zirconia/Alumina-Based All-Ceramic Crowns

by Tomofumi Sawada, Sebastian Spintzyk, Christine Schille, Ernst Schweizer, Lutz Scheideler, Jürgen Geis-Gerstorfer
Published 2016-05-01

Stereolithography vs. Direct Light Processing for Rapid Manufacturing of Complete Denture Bases: An In Vitro Accuracy Analysis

by Alexey Unkovskiy, Franziska Schmidt, Florian Beuer, Ping Li, Sebastian Spintzyk, Pablo Kraemer Fernandez
Published 2021-03-01

Influence of the Conditioning Method for Pre-Sintered Zirconia on the Shear Bond Strength of Bilayered Porcelain/Zirconia

by Sebastian Spintzyk, Kikue Yamaguchi, Tomofumi Sawada, Christine Schille, Ernst Schweizer, Masahiko Ozeki, Jürgen Geis-Gerstorfer
Published 2016-09-01

Comparative Analysis of Mechanical Properties and Metal-Ceramic Bond Strength of Co-Cr Dental Alloy Fabricated by Different Manufacturing Processes

by Xingting Han, Tomofumi Sawada, Christine Schille, Ernst Schweizer, Lutz Scheideler, Jürgen Geis-Gerstorfer, Frank Rupp, Sebastian Spintzyk
Published 2018-09-01

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

by Xingting Han, Neha Sharma, Zeqian Xu, Lutz Scheideler, Jürgen Geis-Gerstorfer, Frank Rupp, Florian M. Thieringer, Sebastian Spintzyk
Published 2019-05-01

Influence of Pre-Sintered Zirconia Surface Conditioning on Shear Bond Strength to Resin Cement

by Tomofumi Sawada, Sebastian Spintzyk, Christine Schille, Judit Zöldföldi, Angelos Paterakis, Ernst Schweizer, Ingrid Stephan, Frank Rupp, Jürgen Geis-Gerstorfer
Published 2016-06-01

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

by Xingting Han, Dong Yang, Chuncheng Yang, Sebastian Spintzyk, Lutz Scheideler, Ping Li, Dichen Li, Jürgen Geis-Gerstorfer, Frank Rupp
Published 2019-02-01