Non isothermal kinetic study of the aluminium titanate formation in alumina-titania mixtures

by N. M. Rendtorff, G. Suárez, E. F. Aglietti
Published 2014-09-01

Comparative evaluation of properties of a clay based ceramic shaped via four techniques

by C. I. Torres, N. M. Rendtorff, M. Cipollone, E. F. Aglietti, G. Suárez

Firing transformations of an argentinean calcareous commercial clay

by M. F. Serra, M.S. Conconi, G. Suarez, E. F. Agietti, N. M. Rendtorff
Published 2013-06-01

Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina

by M. S. Conconi, M. Morosi, J. Maggi, P. E. Zalba, F. Cravero, N. M. Rendtorff

Quantitative firing transformations of a triaxial ceramic by X-ray diffraction methods

by M. S. Conconi, M. R. Gauna, M. F. Serra, G. Suarez, E. F. Aglietti, N. M. Rendtorff
Published 2014-12-01

Densification of lightweight aluminum borate ceramics by direct sintering of milled powders

by M.F. Hernández, G. Suárez, C. Baudin, P. Pena Castro, E.F. Aglietti, N.M. Rendtorff
Published 2018-10-01

Mullite (3Al2O3·2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure

by M.F. Serra, M.S. Conconi, M.R. Gauna, G. Suárez, E.F. Aglietti, N.M. Rendtorff
Published 2016-03-01

Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic

by D. P. C. Velazco, E. F. Sancet, F. Urbaneja, M. Piccico, M. F. Serra, M. F. Acebedo, G. Suárez, N. M. Rendtorff
Published 2014-12-01