Improving the Efficiency of Dental Implantation Process Using Guided Local Search Models and Continuous Time Neural Networks With Robotic Assistance

by Mohamed Hashem, Monis Luqman Mohammed, Ahmed E. Youssef
Published 2020-01-01

Experimental and Numerical Study of Texture Evolution and Anisotropic Plastic Deformation of Pure Magnesium under Various Strain Paths

by Hamad F. Alharbi, Monis Luqman, Ehab El-Danaf, Nabeel H. Alharthi
Published 2018-01-01

Predicting Neurological Disorders Linked to Oral Cavity Manifestations Using an IoMT-Based Optimized Neural Networks

by Mohamed Hashem, Sajith Vellappally, H. Fouad, Monis Luqman, Ahmed E. Youssef
Published 2020-01-01

Sustainable and Smart Manufacturing: An Integrated Approach

by Mohamed Abubakr, Adel T. Abbas, Italo Tomaz, Mahmoud S. Soliman, Monis Luqman, Hussien Hegab
Published 2020-03-01

Multi-Response Optimization in High-Speed Machining of Ti-6Al-4V Using TOPSIS-Fuzzy Integrated Approach

by Adel T. Abbas, Neeraj Sharma, Saqib Anwar, Monis Luqman, Italo Tomaz, Hussien Hegab
Published 2020-03-01

An adaptive design for cost, quality and productivity-oriented sustainable machining of stainless steel 316

by Adel T. Abbas, Mohamed Abubakr, Muhammed A. Hassan, Monis Luqman, Mahmoud S. Soliman, Hussien Hegab
Published 2020-11-01

Effect of Cu Cladding on the Mechanical Properties of Iron Sheath Material in the Drawing of Superconducting MgB₂ Wires

by Niyaz Ahamad Madhar, Mohammed Shahabuddin, Monis Luqman, Taha Bilal, Nasser S. Alzayed, Mohammad Asif
Published 2019-11-01

Effect of Different Cooling Strategies on Surface Quality and Power Consumption in Finishing End Milling of Stainless Steel 316

by Adel T. Abbas, Saqib Anwar, Elshaimaa Abdelnasser, Monis Luqman, Jaber E. Abu Qudeiri, Ahmed Elkaseer
Published 2021-02-01

On the Assessment of Surface Quality and Productivity Aspects in Precision Hard Turning of AISI 4340 Steel Alloy: Relative Performance of Wiper vs. Conventional Inserts

by Adel T. Abbas, Magdy M. El Rayes, Monis Luqman, Noha Naeim, Hussien Hegab, Ahmed Elkaseer
Published 2020-04-01

Investigation on structural and opto-electronic properties of substitutional Sn doped WS2 by co-sputtering technique

by Nabeel H. Alharthi, Saud M. Almotairy, Hamad F. Alharbi, M. Shahinuzzaman, Monis Luqman, K. Sobayel
Published 2021-11-01

Influence of Chloride Ions on Electrochemical Corrosion Behavior of Dual-Phase Steel over Conventional Rebar in Pore Solution

by Hany S. Abdo, Asiful H. Seikh, Jabair A. Mohammed, Monis Luqman, Sameh A. Ragab, Saud M. Almotairy
Published 2020-06-01

Towards an Adaptive Design of Quality, Productivity and Economic Aspects When Machining AISI 4340 Steel With Wiper Inserts

by Adel Taha Abbas, Mohamed Abubakr, Ahmed Elkaseer, Magdy M. El Rayes, Monis Luqman Mohammed, Hussien Hegab
Published 2020-01-01

Studies on the characterization and morphological features of the coating on interstitial free steel dipped in molten Al-Si-Mg alloy at 800 °C

by Partha Pratim Dey, Pranabananda Modak, P.S. Banerjee, Debalay Chakrabarti, Asiful H. Seikh, Hany S. Abdo, Monis Luqman, Manojit Ghosh
Published 2020-05-01

A Comparative Study of the Electrochemical Behavior of α and β Phase Ti6Al4V Alloy in Ringer’s Solution

by Monis Luqman, Asiful H. Seikh, Amit Sarkar, Sameh A. Ragab, Jabair A. Mohammed, Muhammad Farzik Ijaz, Hany S. Abdo
Published 2020-03-01

Microstructural and Corrosion Characteristics of Al-Fe Alloys Produced by High-Frequency Induction-Sintering Process

by Asiful H. Seikh, Muneer Baig, Jitendra Kumar Singh, Jabair A. Mohammed, Monis Luqman, Hany S. Abdo, Amir Rahman Khan, Nabeel H. Alharthi
Published 2019-10-01

Effects of growth temperature on the photovoltaic properties of RF sputtered undoped NiO thin films

by M.S Jamal, S.A. Shahahmadi, P. Chelvanathan, Hamad F. Alharbi, Mohammad R. Karim, Mushtaq Ahmad Dar, Monis Luqman, Nabeel H. Alharthi, Yahya S. Al-Harthi, M. Aminuzzaman, Nilofar Asim, K. Sopian, S.K. Tiong, Nowshad Amin, Md. Akhtaruzzaman
Published 2019-09-01