Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

by Martin Leitner, Roman Aigner, Florian Grün
Published 2019-01-01

Impact of Angular Distortion on the Fatigue Performance of High-Strength Steel T-Joints in as-Welded and High Frequency Mechanical Impact-Treated Condition

by Markus J. Ottersböck, Martin Leitner, Michael Stoschka
Published 2018-04-01

Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

by Philip Pichler, Martin Leitner, Florian Grün, Christoph Guster
Published 2018-01-01

Validation Study on the Statistical Size Effect in Cast Aluminium

by Matthias Oberreiter, Sebastian Pomberger, Martin Leitner, Michael Stoschka
Published 2020-05-01

On the Statistical Size Effect of Cast Aluminium

by Roman Aigner, Sebastian Pomberger, Martin Leitner, Michael Stoschka
Published 2019-05-01

Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

by Manuel Schuscha, Michael Horvath, Martin Leitner, Michael Stoschka
Published 2019-10-01

Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

by Philip Pichler, Martin Leitner, Florian Grün, Jürgen Haßler
Published 2018-01-01

Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

by Markus J. Ottersböck, Martin Leitner, Michael Stoschka, Wilhelm Maurer
Published 2019-10-01

Human Body Mechanics of Pushing and Pulling: Analyzing the Factors of Task-related Strain on the Musculoskeletal System

by Andreas Argubi-Wollesen, Bettina Wollesen, Martin Leitner, Klaus Mattes
Published 2017-03-01

Numerical crack growth study on porosity afflicted cast steel specimens

by Manuel Schuscha, Martin Leitner, Michael Stoschka, Stefan Pusterhofer, Giovanni Meneghetti
Published 2019-02-01

Linear Elastic FE-Analysis of Porous, Laser Welded, Heat Treatable, Aluminium High Pressure Die Castings Based on X-Ray Computed Tomography Data

by Fabian Teichmann, Arne Ziemer, Martin Leitner, Jonas Hensel, Klaus Dilger
Published 2020-03-01

Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

by Sebastian Pomberger, Matthias Oberreiter, Martin Leitner, Michael Stoschka, Jörg Thuswaldner
Published 2020-05-01

Numerical crack growth study on porosity afflicted cast steel specimens

by Manuel Schuscha, Martin Leitner, Michael Stoschka, Stefan Pusterhofer, Giovanni Meneghetti
Published 2019-04-01

Application of a <inline-formula> <mml:math id="mm200" display="block"> <mml:semantics> <mml:msqrt> <mml:mrow>...

by Roman Aigner, Christian Garb, Martin Leitner, Michael Stoschka, Florian Grün
Published 2018-12-01

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

by Wolfgang Schneller, Martin Leitner, Sebastian Springer, Florian Grün, Michael Taschauer
Published 2019-02-01

Fatigue Strength Assessment of Welded Mild Steel Joints Containing Bulk Imperfections

by Martin Leitner, Yukitaka Murakami, Majid Farajian, Heikki Remes, Michael Stoschka
Published 2018-04-01

Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

by David Simunek, Martin Leitner, Jürgen Maierhofer, Hans-Peter Gänser, Reinhard Pippan
Published 2019-02-01

Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

by Martin Leitner, David Simunek, Jürgen Maierhofer, Hans-Peter Gänser, Reinhard Pippan
Published 2019-02-01

Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

by Wolfgang Schneller, Martin Leitner, Sebastian Pomberger, Sebastian Springer, Florian Beter, Florian Grün
Published 2019-10-01

Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys

by Roman Aigner, Martin Leitner, Michael Stoschka, Christian Hannesschläger, Thomas Wabro, Robert Ehart
Published 2018-12-01