Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses

by Fawad Maqbool, Markus Bambach
Published 2019-04-01

Development of a Model for Dynamic Recrystallization Consistent with the Second Derivative Criterion

by Muhammad Imran, Markus Kühbach, Franz Roters, Markus Bambach
Published 2017-11-01

Devising Strain Hardening Models Using Kocks–Mecking Plots—A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel

by Markus Bambach, Irina Sizova, Sebastian Bolz, Sabine Weiß
Published 2016-08-01

Multi-Resolution SPH Simulation of a Laser Powder Bed Fusion Additive Manufacturing Process

by Mohamadreza Afrasiabi, Christof Lüthi, Markus Bambach, Konrad Wegener
Published 2021-03-01

Structural investigations of Fe-Zr-Si-Cu metallic glass with low glass-forming ability produced in laser powder bed fusion technology

by Łukasz Szczepański, Markus Bambach, Felix Jensch, Andrzej Ambroziak, Tomasz Kurzynowski
Published 2021-11-01

Applying Machine Learning to the Phenomenological Flow Stress Modeling of TNM-B1

by Johan A. Stendal, Markus Bambach, Mark Eisentraut, Irina Sizova, Sabine Weiß
Published 2019-02-01

Comparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition

by Mustafa Awd, Jochen Tenkamp, Markus Hirtler, Shafaqat Siddique, Markus Bambach, Frank Walther
Published 2017-12-01

A soft sensor for property control in multi-stage hot forming based on a level set formulation of grain size evolution and machine learning

by Markus Bambach, Muhammad Imran, Irina Sizova, Johannes Buhl, Stephan Gerster, Michael Herty
Published 2021-05-01

Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming

by Ramin Hajavifard, Fawad Maqbool, Anke Schmiedt-Kalenborn, Johannes Buhl, Markus Bambach, Frank Walther
Published 2019-05-01

Analytical and Numerical Temperature Prediction in Direct Metal Deposition of Ti6Al4V

by Benoit de La Batut, Omar Fergani, Vegard Brotan, Markus Bambach, Mohamed El Mansouri
Published 2017-07-01

Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator

by Tatiana Mishurova, Benjamin Sydow, Tobias Thiede, Irina Sizova, Alexander Ulbricht, Markus Bambach, Giovanni Bruno
Published 2020-05-01

Microstructures and Mechanical Properties of Hybrid, Additively Manufactured Ti₆Al₄V after Thermomechanical Processing

by Susanne Hemes, Frank Meiners, Irina Sizova, Rebar Hama-Saleh, Daniel Röhrens, Andreas Weisheit, Constantin Leon Häfner, Markus Bambach
Published 2021-02-01