Optimization of the Loading of an Environmentally Friendly Compatibilizer Derived from Linseed Oil in Poly(Lactic Acid)/Diatomaceous Earth Composites

by Lucia Gonzalez, Angel Agüero, Luis Quiles-Carrillo, Diego Lascano, Nestor Montanes
Published 2019-05-01

Kinetic Analysis of the Curing of a Partially Biobased Epoxy Resin Using Dynamic Differential Scanning Calorimetry

by Diego Lascano, Luis Quiles-Carrillo, Rafael Balart, Teodomiro Boronat, Nestor Montanes
Published 2019-02-01

Manufacturing of composite materials with high environmental efficiency using epoxy resin of renewable origin and permeable light cores for vacuum-assisted infusion molding

by Diego Lascano, Jorge Valcárcel, Rafael Balart, Luís Quiles-Carrillo, Teodomiro Boronat
Published 2019-12-01

Toughened Poly (Lactic Acid)—PLA Formulations by Binary Blends with Poly(Butylene Succinate-<i>co</i>-Adipate)—PBSA and Their Shape Memory Behaviour

by Diego Lascano, Luis Quiles-Carrillo, Rafael Balart, Teodomiro Boronat, Nestor Montanes
Published 2019-02-01

The Effect of Varying Almond Shell Flour (ASF) Loading in Composites with Poly(Butylene Succinate (PBS) Matrix Compatibilized with Maleinized Linseed Oil (MLO)

by Patricia Liminana, Luis Quiles-Carrillo, Teodomiro Boronat, Rafael Balart, Nestor Montanes
Published 2018-11-01

Manufacturing and Characterization of Composite Fibreboards with Posidonia oceanica Wastes with an Environmentally-Friendly Binder from Epoxy Resin

by Daniel Garcia-Garcia, Luis Quiles-Carrillo, Nestor Montanes, Vicent Fombuena, Rafael Balart
Published 2017-12-01

Optimization of the Curing and Post-Curing Conditions for the Manufacturing of Partially Bio-Based Epoxy Resins with Improved Toughness

by Diego Lascano, Luis Quiles-Carrillo, Sergio Torres-Giner, Teodomiro Boronat, Nestor Montanes
Published 2019-08-01

Optimization of Maleinized Linseed Oil Loading as a Biobased Compatibilizer in Poly(Butylene Succinate) Composites with Almond Shell Flour

by Patricia Liminana, David Garcia-Sanoguera, Luis Quiles-Carrillo, Rafael Balart, Nestor Montanes
Published 2019-02-01

Biopolymers from Natural Resources

by Rafael Balart, Daniel Garcia-Garcia, Vicent Fombuena, Luis Quiles-Carrillo, Marina P. Arrieta
Published 2021-07-01

Enhanced Interfacial Adhesion of Polylactide/Poly(ε-caprolactone)/Walnut Shell Flour Composites by Reactive Extrusion with Maleinized Linseed Oil

by Sergi Montava-Jordà, Luis Quiles-Carrillo, Nuria Richart, Sergio Torres-Giner, Nestor Montanes
Published 2019-04-01

Manufacturing and Characterization of Toughened Poly(lactic acid) (PLA) Formulations by Ternary Blends with Biopolyesters

by María Jesús García-Campo, Teodomiro Boronat, Luis Quiles-Carrillo, Rafael Balart, Nestor Montanes
Published 2017-12-01

Bioactive Multilayer Polylactide Films with Controlled Release Capacity of Gallic Acid Accomplished by Incorporating Electrospun Nanostructured Coatings and Interlayers

by Luis Quiles-Carrillo, Nestor Montanes, José M. Lagaron, Rafael Balart, Sergio Torres-Giner
Published 2019-02-01

Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(ε-caprolactone) and Thermoplastic Starch

by Luis Quiles-Carrillo, Nestor Montanes, Fede Pineiro, Amparo Jorda-Vilaplana, Sergio Torres-Giner
Published 2018-10-01

Kinetic Analysis of the Thermal Degradation of Recycled Acrylonitrile-Butadiene-Styrene by non-Isothermal Thermogravimetry

by Rafael Balart, David Garcia-Sanoguera, Luis Quiles-Carrillo, Nestor Montanes, Sergio Torres-Giner
Published 2019-02-01

Assessment of the Mechanical and Thermal Properties of Injection-Molded Poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyhexanoate)/Hydroxyapatite Nanoparticles Parts for Use in Bone Tiss...

by Juan Ivorra-Martinez, Luis Quiles-Carrillo, Teodomiro Boronat, Sergio Torres-Giner, José A. Covas
Published 2020-06-01

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste

by Sergi Montava-Jordà, Sergio Torres-Giner, Santiago Ferrandiz-Bou, Luis Quiles-Carrillo, Nestor Montanes
Published 2019-03-01

Functionalization of Partially Bio-Based Poly(Ethylene Terephthalate) by Blending with Fully Bio-Based Poly(Amide) 10,10 and a Glycidyl Methacrylate-Based Compatibilizer

by Maria Jorda, Sergi Montava-Jorda, Rafael Balart, Diego Lascano, Nestor Montanes, Luis Quiles-Carrillo
Published 2019-08-01

Kinetic Analysis of the Curing Process of Biobased Epoxy Resin from Epoxidized Linseed Oil by Dynamic Differential Scanning Calorimetry

by Diego Lascano, Alejandro Lerma-Canto, Vicent Fombuena, Rafael Balart, Nestor Montanes, Luis Quiles-Carrillo
Published 2021-04-01

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

by Celia Dolza, Eduardo Fages, Eloi Gonga, Jaume Gomez-Caturla, Rafael Balart, Luis Quiles-Carrillo
Published 2021-05-01

Manufacturing and Characterization of Green Composites with Partially Biobased Epoxy Resin and Flaxseed Flour Wastes

by Diego Lascano, Daniel Garcia-Garcia, Sandra Rojas-Lema, Luis Quiles-Carrillo, Rafael Balart, Teodomiro Boronat
Published 2020-05-01