Properties of welded joints made in high strength steel using laser technology

by Tomasz Ślęzak, Lucjan Śnieżek
Published 2017-03-01

The Influence of Post-Weld Heat Treatment on the Microstructure and Fatigue Properties of Sc-Modified AA2519 Friction Stir-Welded Joint

by Robert Kosturek, Lucjan Śnieżek, Marcin Wachowski, Janusz Torzewski
Published 2019-02-01

Microstructure and Residual Stresses of AA2519 Friction Stir Welded Joints under Different Heat Treatment Conditions

by Lucjan Śnieżek, Robert Kosturek, Marcin Wachowski, Bogusz Kania
Published 2020-02-01

Low Cycle Fatigue Properties of Sc-Modified AA2519-T62 Extrusion

by Robert Kosturek, Lucjan Śnieżek, Janusz Torzewski, Marcin Wachowski
Published 2020-01-01

The Influence of the Post-Weld Heat Treatment on the Microstructure of Inconel 625/Carbon Steel Bimetal Joint Obtained by Explosive Welding

by Robert Kosturek, Marcin Wachowski, Lucjan Śnieżek, Michał Gloc
Published 2019-02-01

The Influence of Exposure Energy Density on Porosity and Microhardness of the SLM Additive Manufactured Elements

by Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Mierzyński
Published 2018-11-01

Research on the Friction Stir Welding of Sc-Modified AA2519 Extrusion

by Robert Kosturek, Lucjan Śnieżek, Janusz Torzewski, Marcin Wachowski
Published 2019-09-01

Modification of Structural Properties Using Process Parameters and Surface Treatment of Monolithic and Thin-Walled Parts Obtained by Selective Laser Melting

by Krzysztof Grzelak, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Lucjan Śnieżek, Janusz Torzewski
Published 2020-12-01

Research on the Properties and Low Cycle Fatigue of Sc-Modified AA2519-T62 FSW Joint

by Robert Kosturek, Lucjan Śnieżek, Janusz Torzewski, Tomasz Ślęzak, Marcin Wachowski, Ireneusz Szachogłuchowicz
Published 2020-11-01

The Effect of Post-Weld Hot-Rolling on the Properties of Explosively Welded Mg/Al/Ti Multilayer Composite

by Marcin Wachowski, Robert Kosturek, Lucjan Śnieżek, Sebastian Mróz, Andrzej Stefanik, Piotr Szota
Published 2020-04-01

The Analytical Model of Stress Zone Formation of Ti6Al4V/AA1050/AA2519 Laminate Produced by Explosive Bonding

by Ireneusz Szachogluchowicz, Lucjan Sniezek, Krzysztof Grzelak, Heorhiy Sulym, Ihor Turchyn, Iaroslav Pasternak
Published 2019-07-01

Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate

by Ireneusz Szachogluchowicz, Lucjan Sniezek, Tomasz Slezak, Janusz Kluczyński, Krzysztof Grzelak, Janusz Torzewski, Teresa Fras
Published 2020-09-01

Crack Growth Behavior of Additively Manufactured 316L Steel—Influence of Build Orientation and Heat Treatment

by Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Jakub Łuszczek
Published 2020-07-01

THE INFLUENCE OF FRICTION STIR WELDED PROCESS PARAMETERS OF AA2519-T62 ON JOINT QUALITY DEFINED BY NON-DESTRUCTIVE LASER AMPLIFIED ULTRASONIC METHOD AND BY MICROSTRUCTURE ANALYSIS

by Alexander Kravcov, Robert Kosturek, Lucjan Śnieżek, Janusz Kluczyński, Ondřej Franek, Nikolaj Morozov, Pawel Maciejewski
Published 2020-11-01

Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel

by Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Jacek Janiszewski, Paweł Płatek, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman
Published 2020-03-01

The Influence of Heat Treatment on Low Cycle Fatigue Properties of Selectively Laser Melted 316L Steel

by Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Artur Oziębło, Krzysztof Perkowski, Marcin Wachowski, Marcin Małek
Published 2020-12-01

Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties

by Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Artur Oziębło, Krzysztof Perkowski, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman, Marcin Wachowski, Bogusz Kania
Published 2020-08-01

The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology

by Janusz Kluczyński, Lucjan Śnieżek, Alexander Kravcov, Krzysztof Grzelak, Pavel Svoboda, Ireneusz Szachogłuchowicz, Ondřej Franek, Nikolaj Morozov, Janusz Torzewski, Petr Kubeček
Published 2020-02-01