Grain Boundary Evolution of Cold-Rolled FePd Alloy during Recrystallization at Disordering Temperature

by Hung-Pin Lin, Delphic Chen, Jui-Chao Kuo
Published 2015-06-01

Effect of Annealing Temperature and Oxygen Flow in the Properties of Ion Beam Sputtered SnO—2x Thin Films

by Chun-Min Wang, Chun-Chieh Huang, Jui-Chao Kuo, Dipti Ranjan Sahu, Jow-Lay Huang
Published 2015-08-01

Effect of Niobium Addition on the High-Temperature Oxidation Behavior of 22Cr25NiWCoCu Stainless Steel in Air

by Sheng-Yao Huang, Wen-Ta Tsai, Yeong-Tsuen Pan, Jui-Chao Kuo, Hsien-Wei Chen, Dong-Yih Lin
Published 2019-09-01

Anisotropic Pinning-Effect of Inclusions in Mg-Based Low-Carbon Steel

by Chi-Kang Lin, Hsuan-Hao Lai, Yen-Hao Frank Su, Guan-Ru Lin, Weng-Sing Hwang, Jui-Chao Kuo
Published 2018-11-01

The Influence of Mg-Based Inclusions on the Grain Boundary Mobility of Austenite in SS400 Steel

by Chih-Ting Lai, Hsuan-Hao Lai, Yen-Hao Frank Su, Fei-Ya Huang, Chi-Kang Lin, Jui-Chao Kuo, Hwa-Teng Lee
Published 2019-03-01

Effect of Process Parameters on Structure and Properties of single-track of 316L stainless steel deposited by Direct Energy Deposition

by Yen-TingChen, 陳彥廷
Published 2018

Effect of Heat Treatment on Carbide Banding in High-chromium Bearing Steel

by Hong-YiWu, 吳宏一
Published 2018

In-situ Study of Inclusions Behavior in SS400 with Magnesium Addition at High Temperature

by Hsuan-HaoLai, 賴暄澔
Published 2018

Study of Inclusion Engineering and Tailoring Microstructure in SS400 Steel with Cerium Addition

by Teng-NanSu, 蘇騰南
Published 2018

Understanding the Difference in Preferred Orientation Intensity of Cold-Rolled Copper between Taylor Model Simulation and Experiment

by Shih-ChiehHsiao, 蕭世杰
Published 2018

Study of AF Formation Mechanisms Induced by Mg-Based Inclusions in Low-carbon Steel SS400

by Chi-KangLin, 林紀綱
Published 2019

Simulation of Flow Curve and Rolling Texture of Polycrystalline Copper Using Crystal Plasticity Finite Element Method (CP-FEM)

by Chung-ShaoSun, 孫仲紹
Published 2019

Influence of Twin-Matrix Lamellae on Rolling Texture Simulation in Low Stacking Fault Energy F.C.C Metals Using Taylor-Based Models

by Sin-YingLin, 林昕瑩
Published 2019

Effect of Laser Power on Mechanical Properties and Microstructure of 316L Stainless Steel Deposited by Direct Energy Deposition(DED)

by Tai-YuChiu, 邱泰育
Published 2019

Effect of Manganese Content and Cooling Rate on Transverse Crack in Low Carbon Steel

by Tsung-HsienTsai, 蔡宗憲
Published 2019

EBSD Characterization of Intermetallic Layers in Cu/Al Joint under HTST and HAST Reliability Tests

by Cheng-YiFu, 傅丞逸
Published 2013

Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel

by Zheng-WenHsiao, 蕭証文
Published 2017

Effect of Atomic Number Z on Spatial Resolution of Transmission Electron Backscatter Diffraction

by Chia-WeiKuo, 郭珈瑋
Published 2017

The Study of H13 Single Track using Selective Laser Melting process

by Ying-XianLi, 李映諴
Published 2017

Development of a Numerical System and its Experimental Validation on the Effect of Coil Design on Levitation Force of Metal Ball in Electromagnetic Levitation Smelting Technique

by Yu-TingHung, 洪郁婷
Published 2017