Influence of Alloys Position, Rolling and Welding Directions on Properties of AA2024/AA7050 Dissimilar Butt Weld Obtained by Friction Stir Welding

by Alessandro Barbini, Jan Carstensen, Jorge F. dos Santos
Published 2018-03-01

Microstructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints Using an AddJoining Technique

by Rielson Falck, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2019-03-01

Correction: Falck, R. et al. Microstructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints by AddJoining Techn...

by Rielson Falck, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2020-03-01

Influence of Cu/Li ratio on the microstructure evolution of bobbin-tool friction stir welded Al–Cu–Li alloys

by Jannik Entringer, Martin Reimann, Andrew Norman, Jorge F. dos Santos
Published 2019-04-01

Evaluation of Joint Formation and Mechanical Performance of the AA7075-T6/CFRP Spot Joints Produced by Frictional Heat

by Natalia Manente André, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2019-03-01

The Influence of Clamping Pressure on Joint Formation and Mechanical Performance of Ti6Al4V/CF-PEEK Friction-Riveted Joints

by Natascha Z. Borba, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2019-03-01

Fatigue Performance of Metal–Composite Friction Spot Joints

by Seyed Mohammad Goushegir, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2021-08-01

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

by Seyed M. Goushegir, Nico Scharnagl, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2020-03-01

The effect of grain boundary precipitates on stress corrosion cracking in a bobbin tool friction stir welded Al-Cu-Li alloy

by Jannik Entringer, Martina Meisnar, Martin Reimann, Carsten Blawert, Mikhail Zheludkevich, Jorge F. dos Santos
Published 2019-06-01

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

by André B. Abibe, Marilia Sônego, Leonardo B. Canto, Jorge F. dos Santos, Sergio T. Amancio-Filho
Published 2020-02-01

Fundamentals of Force-Controlled Friction Riveting: Part I—Joint Formation and Heat Development

by Gonçalo Pina Cipriano, Lucian A. Blaga, Jorge F. dos Santos, Pedro Vilaça, Sergio T. Amancio-Filho
Published 2018-11-01

Fundamentals of Force-Controlled Friction Riveting: Part II—Joint Global Mechanical Performance and Energy Efficiency

by Gonçalo Pina Cipriano, Lucian A. Blaga, Jorge F. dos Santos, Pedro Vilaça, Sergio T. Amancio-Filho
Published 2018-12-01

Influência da Espessura do Filme Polimérico Intermediário na Resistência Mecânica de Juntas Híbridas de Alumínio 2024-T3 e CF-PPS Produzidas por União Pontual por Fricção

by Natália M. André, Seyed M. Goushegir, Jorge F. dos Santos, Leonardo B. Canto, Sergio T. Amancio-Filho
Published 2016-03-01

Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel

by Bruna Fernanda Batistão, Luciano Andrei Bergmann, Piter Gargarella, Nelson Guedes de Alcântara, Jorge F. dos Santos, Benjamin Klusemann
Published 2020-11-01

Microstructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery application

by Dennis Gera, Banglong Fu, Uceu F.H.R. Suhuddin, Athos Plaine, Nelson Alcantara, Jorge F. dos Santos, Benjamin Klusemann
Published 2021-07-01

On the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted Joints

by Natascha Z. Borba, Conrado R. M. Afonso, Lucian Blaga, Jorge F. dos Santos, Leonardo B. Canto, Sergio T. Amancio-Filho
Published 2017-02-01

Intergranular corrosion evaluation of friction stir welded AISI 410S ferritic stainless steel

by Gerbson de Queiroz Caetano, Cleiton Carvalho Silva, Marcelo Ferreira Motta, Hélio Cordeiro Miranda, Jesualdo Pereira Farias, Luciano Andrei Bergmann, Jorge F. dos Santos
Published 2019-04-01

Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel

by Banglong Fu, Junjun Shen, Uceu F.H.R. Suhuddin, Ayrton A.C. Pereira, Emad Maawad, Jorge F. dos Santos, Benjamin Klusemann, Michael Rethmeier
Published 2021-11-01