3D Printing of Porous Scaffolds with Controlled Porosity and Pore Size Values

by Irene Buj-Corral, Ali Bagheri, Oriol Petit-Rojo
Published 2018-08-01

Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses

by Jordi Bonada, Mª Magdalena Pastor, Irene Buj-Corral
Published 2021-09-01

Effect of Printing Parameters on Dimensional Error, Surface Roughness and Porosity of FFF Printed Parts with Grid Structure

by Irene Buj-Corral, Ali Bagheri, Maurici Sivatte-Adroer
Published 2021-04-01

Comparative Study of Flank Cams Manufactured by WEDM and Milling Processes

by Irene Buj-Corral, Enrique Zayas-Figueras, Àngels Montaña-Faiget
Published 2020-08-01

Development of AM Technologies for Metals in the Sector of Medical Implants

by Irene Buj-Corral, Aitor Tejo-Otero, Felip Fenollosa-Artés
Published 2020-05-01

Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes

by Irene Buj-Corral, Alejandro Domínguez-Fernández, Ana Gómez-Gejo
Published 2020-05-01

Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes

by Irene Buj-Corral, Alejandro Domínguez-Fernández, Ramón Durán-Llucià
Published 2019-11-01

Effect of Grain Size and Density of Abrasive on Surface Roughness, Material Removal Rate and Acoustic Emission Signal in Rough Honing Processes

by Irene Buj-Corral, Jesús Álvarez-Flórez, Alejandro Domínguez-Fernández
Published 2019-08-01

Effect of Process Parameters on the Quality of Laser-Cut Stainless Steel Thin Plates

by Irene Buj-Corral, Lluís Costa-Herrero, Alejandro Domínguez-Fernández
Published 2021-07-01

Analysis of AM Parameters on Surface Roughness Obtained in PLA Parts Printed with FFF Technology

by Irene Buj-Corral, Xavier Sánchez-Casas, Carmelo J. Luis-Pérez
Published 2021-07-01

A Conceptual Tool for the Implementation of the Circular Economy Emissions Reuse Closed Loops through Process Equipment

by Gregorio Ridaura, Sonia Llorens-Cervera, Carmen Carrillo, Irene Buj-Corral, Carles Riba-Romeva
Published 2018-10-01

Evaluation of project based learning in the area of manufacturing and statistics in the degree of industrial technology

by Irene Buj-Corral, Lluís Marco-Almagro, Alex Riba, Joan Vivancos-Calvet, Xavier Tort-Martorell
Published 2015-06-01

Determination of the Elasticity Modulus of 3D-Printed Octet-Truss Structures for Use in Porous Prosthesis Implants

by Ali Bagheri, Irene Buj-Corral, Miquel Ferrer Ballester, Maria Magdalena Pastor, Francesc Roure Fernandez
Published 2018-11-01

Optimal Machining Strategy Selection in Ball-End Milling of Hardened Steels for Injection Molds

by Irene Buj-Corral, Jose-Antonio Ortiz-Marzo, Lluís Costa-Herrero, Joan Vivancos-Calvet, Carmelo Luis-Pérez
Published 2019-03-01