Analisi termica per la valutazione del comportamento a fatica di provini soggetti a successive serie di carichi

by Antonino Risitano, Giacomo Risitano
Published 2013-04-01

Analisi termica per la valutazione del comportamento a fatica di provini soggetti a successive serie di carichi

by Antonino Risitano, Giacomo Risitano
Published 2013-04-01

Analisi termica per la valutazione del comportamento a fatica di provini soggetti a successive serie di carichi

by Giacomo Risitano, Antonino Risitano
Published 2010-04-01

A Parametric Study on a Dental Implant Geometry Influence on Bone Remodelling through a Numerical Algorithm

by Dario Santonocito, Fabiana Nicita, Giacomo Risitano
Published 2021-06-01

Performance Analysis of a Magnetorheological Shock Absorber Prototype Designed According to a Quasi-Static No-Slip Model

by Danilo D’Andrea, Giacomo Risitano, Lorenzo Scappaticci
Published 2021-01-01

FEM Investigation of the Stress Distribution over Mandibular Bone Due to Screwed Overdenture Positioned on Dental Implants

by Marco Cicciù, Gabriele Cervino, Dario Milone, Giacomo Risitano
Published 2018-08-01

FEM Analysis of Dental Implant-Abutment Interface Overdenture Components and Parametric Evaluation of Equator^® and Locator^® Prosthodontics Attachments

by Marco Cicciù, Gabriele Cervino, Dario Milone, Giacomo Risitano
Published 2019-02-01

Periodontal Health and Caries Prevalence Evaluation in Patients Affected by Parkinson's Disease

by Marco Cicciù, Giacomo Risitano, Giuseppe Lo Giudice, Ennio Bramanti
Published 2012-01-01

Investigation of the Tribological Properties of Different Textured Lead Bronze Coatings under Severe Load Conditions

by Adolfo Senatore, Giacomo Risitano, Lorenzo Scappaticci, Danilo D’Andrea
Published 2021-03-01

Comparison of Experimental Thermal Methods for the Fatigue Limit Evaluation of a Stainless Steel

by Mauro Ricotta, Giovanni Meneghetti, Bruno Atzori, Giacomo Risitano, Antonino Risitano
Published 2019-06-01

An Approach to the Definition of the Aerodynamic Comfort of Motorcycle Helmets

by Lorenzo Scappaticci, Giacomo Risitano, Dario Santonocito, Danilo D’Andrea, Dario Milone
Published 2021-08-01

Sandblasted and Acid Etched Titanium Dental Implant Surfaces Systematic Review and Confocal Microscopy Evaluation

by Gabriele Cervino, Luca Fiorillo, Gaetano Iannello, Dario Santonocito, Giacomo Risitano, Marco Cicciù
Published 2019-05-01

Development of Machine Learning Algorithms for the Determination of the Centre of Mass

by Danilo D’Andrea, Filippo Cucinotta, Flavio Farroni, Giacomo Risitano, Dario Santonocito, Lorenzo Scappaticci
Published 2021-02-01

Thermal Emission analysis to predict damage in specimens of High Strength Concrete

by Filippo Cucinotta, Antonino D'Aveni, Eugenio Guglielmino, Antonino Risitano, Giacomo Risitano, Dario Santonocito
Published 2020-12-01

A Neural-Network-Based Methodology for the Evaluation of the Center of Gravity of a Motorcycle Rider

by Francesco Carputo, Danilo D’Andrea, Giacomo Risitano, Aleksandr Sakhnevych, Dario Santonocito, Flavio Farroni
Published 2021-07-01

Artificial Neural Network Prediction of the Optimal Setup Parameters of a Seven Degrees of Freedom Mathematical Model of a Race Car: IndyCar Case Study

by Danilo D’Andrea, Giacomo Risitano, Ernesto Desiderio, Andrea Quintarelli, Dario Milone, Fabio Alberti
Published 2021-06-01

Chemical and Mechanical Roughening Treatments of a Supra-Nano Composite Resin Surface: SEM and Topographic Analysis

by Francesco Puleio, Giuseppina Rizzo, Fabiana Nicita, Fabrizio Lo Giudice, Cristina Tamà, Gaetano Marenzi, Antonio Centofanti, Marcello Raffaele, Dario Santonocito, Giacomo Risitano
Published 2020-06-01