Structure and Properties of Zn-Ti0.2-Cu0.15 Single Crystal Containing Eutectic Precipitates

by Boczkal G.
Published 2013-12-01

Melting Point Of Metals In Relation Io Electron Charge Density

by Boczkal G.
Published 2015-09-01

The Brittleness Of Zn-Cu-Ti Sheet Alloys

by Boczkal G., Mikułowski B.
Published 2015-09-01

Non-Equilibrium Crystallization of Monotectic Zn-25%Bi Alloy under 600 <i>g</i>

by Grzegorz Boczkal, Pawel Palka, Piotr Kokosz, Sonia Boczkal, Grazyna Mrowka-Nowotnik
Published 2021-08-01

Formation of Transition Phases on Interface between Monocrystalline Fe and Cu Due to Mutual Solid-State Diffusion

by Perek-Nowak M., Boczkal G.
Published 2016-06-01

Influence of the Sr and Mg Alloying Additions on the Bonding Between Matrix and Reinforcing Particles in the AlSi7Mg/SiC-Cg Hybrid Composite

by Dolata A. J., Dyzia M., Boczkal S.
Published 2016-06-01

Mechanical Properties of Composites with Titanium Diboride Fabricated by Spark Plasma Sintering

by Sulima I., Boczkal G., Palka P.
Published 2017-09-01

Effect of SiC and GR Reinforcement Particles on the Structure and Functional Properties of Composite Casting E43 MMC Reinforced with SiC Particles

by Boczkal S., Dolata A.J., Nowak M.
Published 2016-03-01

Joining of Low-Carbon Steel Sheets with Al-Based Weld

by Boczkal G., Perek-Nowak M., Majewska Z.
Published 2016-03-01

CHARACTERIZATION OF THE GRAINS IN 2014 ALUMINIUM ALLOY AFTER EQUAL CHANNEL ANGULAR EXTRUSION (ECAE) PROCESS

by Sonia Boczkal, Marzena Lech-Grega, Wojciech Szymański
Published 2011-05-01

Diversification of Intermetallic Zn Phases Growth on Steel During Hot-Dip Galvanizing

by Węgrzynkiewicz S., Jędrzejczyk D., Szłapa I., Hajduga M., Boczkal S.
Published 2016-06-01

Texture and Microtexture of Pure (6N) and Commercially Pure Aluminum after Deformation by Extrusion with Forward-Backward Rotating Die (Kobo)

by Bieda M., Boczkal S., Koprowski P., Sztwiertnia K., Pieła K.
Published 2016-03-01

Heat Treated AZ61 Magnesium Alloy Obtained by Direct Extrusion and Continuous Rotary Extrusion Process

by Bigaj M., Boczkal S., Żelechowski J., Gawlik M., Mitka M.
Published 2016-03-01

Effect of incremental equal channel angular pressing (I-ECAP) on the microstructural characteristics and mechanical behaviour of commercially pure titanium

by Muhammad Jawad Qarni, Giribaskar Sivaswamy, Andrzej Rosochowski, Sonia Boczkal
Published 2017-05-01

Tribological Wear Behaviour of Electrical Contacts Made from AgNi10 Composite

by Richert M.W., Boczkal G., Hotloś A., Pałka P., Karpiński M.
Published 2017-12-01

Microstructure and Properties of As-Cast and Heat-Treated 2017A Aluminium Alloy Obtained from Scrap Recycling

by Mrówka-Nowotnik Grażyna, Kamil Gancarczyk, Andrzej Nowotnik, Kamil Dychtoń, Grzegorz Boczkal
Published 2021-12-01

SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING

by Jan Dutkiewicz, Stanislav Rusz, Dariusz Kuc, Ondrej Hilser, Paweł Pałka, Grzegorz Boczkal
Published 2017-09-01

Microstructural and Fractographic Analysis of Plastically Deformed Al-Zn-Mg Alloy Subjected to Combined High-Cycle Bending-Torsion Fatigue

by Aleksander Kowalski, Wojciech Ozgowicz, Wojciech Jurczak, Adam Grajcar, Sonia Boczkal, Andrzej Kurek
Published 2018-06-01

Microstructure, Mechanical Properties, and Corrosion Resistance of Thermomechanically Processed AlZn6Mg0.8Zr Alloy

by Aleksander Kowalski, Wojciech Ozgowicz, Wojciech Jurczak, Adam Grajcar, Sonia Boczkal, Janusz Żelechowski
Published 2018-04-01

The effect of severe plastic deformation on the Mg properties after CEC deformation

by B. Sułkowski, M. Janoska, G. Boczkal, R. Chulist, M. Mroczkowski, P. Pałka
Published 2020-09-01