Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors

by Adel T. Abbas, Adham E. Ragab, Faycal Benyahia, Mahmoud S. Soliman
Published 2018-01-01

Using Electroencephalography (EEG) Power Responses to Investigate the Effects of Ambient Oxygen Content, Safety Shoe Type, and Lifting Frequency on the Worker’s Activities

by Mohamed Z. Ramadan, Atef M. Ghaleb, Adham E. Ragab
Published 2020-01-01

Prediction of formation force during single-point incremental sheet metal forming using artificial intelligence techniques.

by Ali Alsamhan, Adham E Ragab, Abdulmajeed Dabwan, Mustafa M Nasr, Lotfi Hidri
Published 2019-01-01

Studying the Effect of Process Parameters on Part Depth in Single Point Incremental Forming of AA1050-H14 Aluminum Alloy Sheets

by Adel Al-Shayea, Abdulmajeed Dabwan*, Adham E Ragab, Mustafa M. Nasr, Husam Kaid
Published 2019-01-01

Effect of Cycling on a Stationary Bike While Performing Assembly Tasks on Human Physiology and Performance Parameters

by Atef M. Ghaleb, Tamer M. Khalaf, Mohamed Z. Ramadan, Adham E. Ragab, Ahmed Badwelan
Published 2020-03-01

High Aspect Ratio Thin-Walled Structures in D2 Steel through Wire Electric Discharge Machining (EDM)

by Naveed Ahmed, Muhammad Ahmad Naeem, Ateekh Ur Rehman, Madiha Rafaqat, Usama Umer, Adham E. Ragab
Published 2021-12-01

Low-Cost Goethite Nanorods for As (III) and Se (VI) Removal from Water

by Mokhtar Ali Amrani, Atef M. Ghaleb, Adham E. Ragab, Mohamed Z. Ramadan, Tamer M. Khalaf
Published 2020-10-01

Prediction Model of Cutting Parameters for Turning High Strength Steel Grade-H: Comparative Study of Regression Model versus ANFIS

by Adel T. Abbas, Mohanad Alata, Adham E. Ragab, Magdy M. El Rayes, Ehab A. El Danaf
Published 2017-01-01

Psychophysiological responses to manual lifting of unknown loads.

by Tamer M Khalaf, Mohamed Z Ramadan, Adham E Ragab, Mohammed H Alhaag, Khalil A AlSharabi
Published 2021-01-01

A new method to produce T-shaped tubular fittings with experimental and simulation results.

by Atef M Ghaleb, Mohamed A Saleh, Adham E Ragab, Abdulmajeed Dabwan, Tamer M Khalaf, Usama Umer
Published 2019-01-01

Study of the Effect of Process Parameters on Surface Profile Accuracy in Single-Point Incremental Sheet Forming of AA1050-H14 Aluminum Alloy

by Abdulmajeed Dabwan, Adham E. Ragab, Mohamed A. Saleh, Saqib Anwar, Atef M. Ghaleb, Ateekh Ur Rehman
Published 2020-01-01

Prediction of Cutting Conditions in Turning AZ61 and Parameters Optimization Using Regression Analysis and Artificial Neural Network

by Nabeel H. Alharthi, Sedat Bingol, Adel T. Abbas, Adham E. Ragab, Mohamed F. Aly, Hamad F. Alharbi
Published 2018-01-01

Optimizing Cutting Conditions and Prediction of Surface Roughness in Face Milling of AZ61 Using Regression Analysis and Artificial Neural Network

by Nabeel H. Alharthi, Sedat Bingol, Adel T. Abbas, Adham E. Ragab, Ehab A. El-Danaf, Hamad F. Alharbi
Published 2017-01-01

Achieving the Minimum Roughness of Laser Milled Micro-Impressions on Ti 6Al 4V, Inconel 718, and Duralumin

by Naveed Ahmed, Ateekh Ur Rehman, Kashif Ishfaq, Rakhshanda Naveed, Khaja Moiduddin, Usama Umer, Adham E Ragab, Ayoub Al-Zabidi
Published 2020-10-01

Dynamic Behaviors and Microstructure Evolution of Iron–Nickel Based Ultra-High Strength Steel by SHPB Testing

by Hongge Fu, Xibin Wang, Lijing Xie, Xin Hu, Usama Umer, Ateekh Ur Rehman, Mustufa Haider Abidi, Adham E. Ragab
Published 2019-12-01