Compressive and Flexural Strength of Expanded Perlite Aggregate Mortar Subjected To High Temperatures

• Main Authors: Mohamed, HBMSH (Author), Zulkifeli, MFHB (Author)
• Format: Article
• Language: English
• Published: 2017
• Subjects: LIGHTWEIGHT; THERMAL-CONDUCTIVITY
• Online Access: View Fulltext in Publisher

 Work on thermal resistant of outer structures of buildings is one of the solution to reduce death, damages and properties loss in fire cases. Structures protected with thermal resistant materials can delay or avoid failure and collapse during fire. Hence, establishment of skin cladding with advance materials to protect the structure of buildings is a necessary action. Expanded perlite is a good insulation material which can be used as aggregate replacement in mortar. This study is to study on mortar mechanical properties of flexural and compressive strength subjected to elevated temperatures using expanded perlite aggregate (EPA). This study involved experimental work which was developing mortar with sand replacement by volume of 0%, 10%, 20%, 30% and 40% of EPA and cured for 56 days. The mortars then exposed to 200 degrees C, 400 degrees C, 700 degrees C and 1000 degrees C. Flexural and compressive strength of the mortar were tested. The tests showed thatthere were increased of flexural and compressive strength at 200 degrees C, and constantly decreased when subjected to 400 degrees C, 700 degrees C and 1000 degrees C. There were also variation of strengths at different percentages of EPA replacement. Highest compressive strength and flexural strength recorded were both at 200 degrees C with 65.52 MPa and 21.34 MPa respectively. The study conclude that by using EPA as aggregate replacement was ineffective below elevated temperatures but increased the performance of the mortar at elevated temperatures.