An adaptive scaling and biasing scheme for OFDM-based visible light communication systems

Orthogonal frequency-division multiplexing (OFDM) has been widely used in visible light communication systems to achieve high-rate data transmission. Due to the nonlinear transfer characteristics of light emitting diodes (LEDs) and owing the high peak-to-averagepower ratio of OFDM signals, the trans...

Full description

Bibliographic Details
Main Authors: Wang, Zhaocheng (Author), Wang, Qi (Author), Chen, Sheng (Author), Hanzo, Lajos (Author)
Format: Article
Language:English
Published: 2014-05-19.
Subjects:
Online Access:Get fulltext
LEADER 01522 am a22001573u 4500
001 365027
042 |a dc 
100 1 0 |a Wang, Zhaocheng  |e author 
700 1 0 |a Wang, Qi  |e author 
700 1 0 |a Chen, Sheng  |e author 
700 1 0 |a Hanzo, Lajos  |e author 
245 0 0 |a An adaptive scaling and biasing scheme for OFDM-based visible light communication systems 
260 |c 2014-05-19. 
856 |z Get fulltext  |u https://eprints.soton.ac.uk/365027/1/oe-22-10-12707.pdf 
520 |a Orthogonal frequency-division multiplexing (OFDM) has been widely used in visible light communication systems to achieve high-rate data transmission. Due to the nonlinear transfer characteristics of light emitting diodes (LEDs) and owing the high peak-to-averagepower ratio of OFDM signals, the transmitted signal has to be scaled and biased before modulating the LEDs. In this contribution, an adaptive scaling and biasing scheme is proposed for OFDM based visible light communication systems, which fully exploits the dynamic range of the LEDs and improves the achievable system performance. Specifically, the proposed scheme calculates near-optimal scaling and biasing factors for each specific OFDM symbol according to the distribution of the signals, which strikes an attractive trade-off between the effective signal power and the clipping distortion power. Our simulation results demonstrate that the proposed scheme significantly improves the performance without changing the LED's emitted power, while maintaining the same receiver structure. 
655 7 |a Article