Friction reduction in low-load hydrodynamic lubrication with a hydrophobic surface
A novel tribometer capable of measuring low friction forces and low loads at high speeds has been employed to measure the friction coefficient in a pure sliding, ball-on-flat contact in hydrodynamic lubrication conditions. The tribometer was custom-built for measuring friction at low loads, to allow...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
2007-02.
|
| Subjects: | |
| Online Access: | Get fulltext |
| Summary: | A novel tribometer capable of measuring low friction forces and low loads at high speeds has been employed to measure the friction coefficient in a pure sliding, ball-on-flat contact in hydrodynamic lubrication conditions. The tribometer was custom-built for measuring friction at low loads, to allow the authors to investigate the feasibility of using the liquid-slip phenomenon for the lubrication of high-sliding MEMS. The theory behind lubrication with liquid slip and its effect on friction is briefly discussed. Contacting surfaces were treated to create hydrophobic/hydrophilic or hydrophilic/hydrophilic pairs. Hydrophobic surfaces were made by coating mica with a self-assembled silane monolayer while the hydrophilic surfaces used were freshly cleaved mica and plasma-cleaned steel. Experiments were conducted at sliding speeds of up to 2 m/s and loads below 0.2 N. An aqueous glycerol solution was used as lubricant. Results obtained with hydrophilic/hydrophilic surfaces were in accord with hydrodynamic lubrication theory. Tests with hydrophobic/hydrophilic surfaces revealed a reduction in friction, which may be attributed to lubricant slip against the hydrophobic surface. |
|---|