| Summary: | Liquefied hydrogen storage vessels (LHSVs) are vulnerable to surface‐crack initiation, propagation, and fracture on their surfaces because they are under high‐pressure, low‐temperature conditions. Defects can also occur in the coatings of the storage containers used to prevent hydrogen permeation, and these lead to surface defects such as pitting corrosions. Together, these increase the probability of liquid hydrogen leaks and can cause serious accidents. Therefore, it is important to detect surface defects during periodic surface inspections of LHSVs. Among the candidate non-destructive evaluation (NDE) techniques, testing using guided waves (GWs) is effective for detecting surface defects. Because of the ability of GWs to travel long distances without significant acous-tic attenuation, GW testing has attracted much attention as a promising structural monitoring technique for LHSVs. In this study, an ultrasonic NDE method was designed for detecting surface defects of 304SS plate, which is the main material used for fabricating LHSVs. It involves the use of linear discriminant analysis (LDA) based on short‐time Fourier transform (STFT) pixel information produced from GW data. To accomplish this, the differences in the number of STFT pixels between sound and defective specimens were used as a major factor in distinguishing the two groups. Con-sequently, surface defects could be detected and classified with 97% accuracy by the newly developed pixel‐based mapping method. This indicates that the newly developed NDE method with LDA can be used to detect defects and classify LHSVs as either sound or defective. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
|
|---|
