Part 2: Stabilization/Containment of Radiological Particle Contamination to Enhance First Responder, Early Phase Worker, and Public Safety

The application of stabilization technologies to a radiologically contaminated surface has the potential for reducing the spread of contamination and, as a result, decreasing worker exposure to radiation. Three stabilization technologies, calcium chloride (CaCl2), flame retardant Phos-Chek® MVP-Fx,...

Full description

Bibliographic Details
Main Authors: Archer, J. (Author), James, R. (Author), Lawrence, M. (Author), Magnuson, M. (Author), Raveh-Amit, H. (Author), Serre, S. (Author), Sharon, A. (Author), Stilman, T. (Author), Tamargo, E. (Author), Xia, X. (Author)
Format: Article
Language:English
Published: MDPI 2022
Subjects:
Online Access:View Fulltext in Publisher
LEADER 03561nam a2200301Ia 4500
001 10.3390-app12083861
008 220510s2022 CNT 000 0 und d
020 |a 20763417 (ISSN) 
245 1 0 |a Part 2: Stabilization/Containment of Radiological Particle Contamination to Enhance First Responder, Early Phase Worker, and Public Safety 
260 0 |b MDPI  |c 2022 
856 |z View Fulltext in Publisher  |u https://doi.org/10.3390/app12083861 
520 3 |a The application of stabilization technologies to a radiologically contaminated surface has the potential for reducing the spread of contamination and, as a result, decreasing worker exposure to radiation. Three stabilization technologies, calcium chloride (CaCl2), flame retardant Phos-Chek® MVP-Fx, and Soil2O™ were investigated to evaluate their ability to reduce the resuspension and tracking of radiological contamination during response activities such as vehicle and foot traffic. Concrete pavers, asphalt pavers, and sandy soil walking paths were used as test surfaces, along with simulated fallout material (SFM) tagged with radiostrontium (Sr-85) applied as the contaminant. Radiological activities were measured using gamma spectrometry before and after simulated vehicle operation and foot traffic experiments, conducted with each stabilization technology and without application as a nonstabilized control. These measurements were acquired separately for each combination of surface and vehicle/foot traffic experiment. The resulting data describes the extent of SFM removed from each surface onto the tires or boots, the extent of SFM transferred to adjacent surfaces, and the residual SFM remaining on the tires or boots after each experiment. The type of surface and response worker actions influenced the stabilization results. For instance, when walked over, less than 2% of particles were removed from nonstabilized concrete, 4% from asphalt, and 40% of the particles were removed from the sand surface. By contrast, for vehicle experiments, ~40% of particles were again removed from the sand, but 7% and 15% from concrete and asphalt, respectively. In most cases, the stabilization technologies did provide improved stabilization. The improvement was related to the type of surface, worker actions, and stabilizer; a statistical analysis of these variables is presented. Overall, the results suggest an ability to utilize these technologies during the planning and implementation of response activities involving foot and vehicle traffic. In addition, resuspension of aerosolizable range SFM was monitored during walking path foot traffic experiments, and all stabilizing agents decreased the measured radioactivity, with the Soil2O™ decrease being 3 fold, whereas the CaCl2 and Phos-Chek MVP-Fx surfaces generated no detectable radioactivity. Overall, these results suggest that the stabilization technologies decrease the availability of particles respirable by response workers under these conditions. © 2022 by the authors. Licensee MDPI, Basel, Switzerland. 
650 0 4 |a cesium 
650 0 4 |a containment 
650 0 4 |a radiological contamination 
650 0 4 |a stabilization 
650 0 4 |a strontium 
700 1 |a Archer, J.  |e author 
700 1 |a James, R.  |e author 
700 1 |a Lawrence, M.  |e author 
700 1 |a Magnuson, M.  |e author 
700 1 |a Raveh-Amit, H.  |e author 
700 1 |a Serre, S.  |e author 
700 1 |a Sharon, A.  |e author 
700 1 |a Stilman, T.  |e author 
700 1 |a Tamargo, E.  |e author 
700 1 |a Xia, X.  |e author 
773 |t Applied Sciences (Switzerland)