|
|
|
|
| LEADER |
01748nam a2200205Ia 4500 |
| 001 |
0.18280-mmep.090112 |
| 008 |
220421s2022 CNT 000 0 und d |
| 020 |
|
|
|a 23690739 (ISSN)
|
| 245 |
1 |
0 |
|a PI Optimized Cuckoo Search Algorithm for Single Phase Grid Tied PV Inverter with SEPIC Converter
|
| 260 |
|
0 |
|b International Information and Engineering Technology Association
|c 2022
|
| 856 |
|
|
|z View Fulltext in Publisher
|u https://doi.org/10.18280/mmep.090112
|
| 520 |
3 |
|
|a A new approach for single phase grid interconnected PV module with SEPIC converter is introduced in this paper. As the outcome of PV is low voltage DC, a suitable converter is needed to boost the voltage. Hence SEPIC converter is used as it has high voltage gain with same polarity in the input as well as output side. A closed loop control is executed with a PI controller tuned with Cuckoo search (CS) algorithm. As the traditional tuning of PI controller results in peak overshoot problems, Cuckoo search (CS) based Optimization is utilized as it is simple with has a smaller number of tuning parameters. This output is being fed to the grid through a single phase VSI and the grid synchronization is accomplished by PI controller by analogizing the actual and reference values of power. Thus, the proposed control strategy is verified through MATLAB and it is observed that the source current THD is minimized, which satisfies the IEEE standard © 2022,Mathematical Modelling of Engineering Problems.All Rights Reserved
|
| 650 |
0 |
4 |
|a Cs algorithm
|
| 650 |
0 |
4 |
|a Dc-dc converter
|
| 650 |
0 |
4 |
|a Mppt algorithm
|
| 650 |
0 |
4 |
|a Pv system
|
| 650 |
0 |
4 |
|a Sepic converter
|
| 700 |
1 |
0 |
|a Barathi, K.
|e author
|
| 700 |
1 |
0 |
|a Dhal, P.K.
|e author
|
| 773 |
|
|
|t Mathematical Modelling of Engineering Problems
|
