Amplification of Long-Range Surface Plasmon-Polaritons
Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such appl...
| Main Author: | |
|---|---|
| Other Authors: | |
| Language: | en |
| Published: |
Université d'Ottawa / University of Ottawa
2011
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10393/19790 http://dx.doi.org/10.20381/ruor-4440 |
| Summary: | Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal.
In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton.
On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation.
On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail. |
|---|