The Stopping of Energetic Si, P and S Ions in Ni, Cu, Ge and GaAs Targets

• Main Author: Nigam, Mohit
• Other Authors: Duggan, Jerome L.
• Format: Others
• Language: English
• Published: University of North Texas 2001
• Subjects: Stopping power (Nuclear physics); Heavy ions.; Compound semiconductors.; Stopping powers; heavy ions; compound semiconductors; ion beam analysis; Bragg's rule
• Online Access: https://digital.library.unt.edu/ark:/67531/metadc3004/

Accurate knowledge of stopping powers is essential for these for quantitative analysis and surface characterization of thin films using ion beam analysis (IBA). These values are also of interest in radiobiology and radiotherapy, and in ion- implantation technology where shrinking feature sizes puts high demands on the accuracy of range calculations. A theory that predicts stopping powers and ranges for all projectile-target combinations is needed. The most important database used to report the stopping powers is the SRIM/TRIM program developed by Ziegler and coworkers. However, other researchers report that at times, these values differ significantly from experimental values. In this study the stopping powers of Si, P and S ions have been measured in Ni, Cu, Ge and GaAs absorbers in the energy range ~ 2-10 MeV. For elemental films of Ni, Cu and Ge, the stopping of heavy ions was measured using a novel ERD (Elastic Recoil Detection) based technique. In which an elastically recoiled lighter atom is used to indirectly measure the energy of the incoming heavy ion using a surface barrier detector. In this way it was possible to reduce the damage and to improve the FWHM of the detector. The results were compared to SRIM-2000 predictions and other experimental measurements. A new technique derived from Molecular Beam Epitaxy (MBE) was developed to prepare stoichiometric GaAs films on thin carbon films for use in transmission ion beam experiments. The GaAs films were characterized using X-ray Photoelectron Spectroscopy (XPS) and Particle Induced X-ray Emission (PIXE). These films were used to investigate the stopping powers of energetic heavy ions in GaAs and to provide data for the calculation of Bethe-Bloch parameters in the framework of the Modified Bethe-Bloch theory. As a result of this study, stopping power data are available for the first time for Si and P ions in the energy range 2-10 MeV stopping in GaAs absorbers.