Contribution à l'étude de la formation des sprays

Contribution à l'étude de la formation des sprays

Show other versions (1)

Le travail de cette thèse a pour but de fournir et valider des outils permettant d'étudier et de comprendre les phénomènes mis en jeu lors de l'injection d'un carburant dans un moteur à combustion interne, principalement axé sur l'écoulement intra-injecteur. Ces outils sont numér...

Full description

Bibliographic Details
Main Author:	Dos Santos, Fabien
Other Authors:	Dijon
Language:	fr
Published:	2012
Subjects:	Modélisation Energétique Injection Spray MFN/CFD Cavitation Intra-injecteur Atomisation Maillage mobile OpenFOAM 0D modelling 3D modelling Intra-injector Moving mesh 515 532 620.1
Online Access:	http://www.theses.fr/2012DIJOS079/document

Similar Items

Contribution à l'étude de la formation des sprays
by: Dos Santos, Fabien
Published: (2012)

Coefficient Adaptation Method for the Zwart Model
by: W. Jin, et al.
Published: (2018-01-01)

Etude Expérimentale des Processus d'Atomisation Textuels : Application à des Ecoulements Cavitants.
by: Abuzahra, Fakhry
Published: (2019)

Etude numérique de l’impact de la géométrie de la buse de l’injecteur sur l’écoulement à l’intérieur de la buse et l’atomisation primaire
by: Aguado, Pablo
Published: (2017)

Interaction between Natural and Ventilated Cavitation around a Base Ventilated Hydrofoil
by: H. Zhou, et al.
Published: (2019-01-01)

A NUMERICAL STUDY OF A NEW SPRAY APPLICATOR
by: Srinivasan, Vedanth
Published: (2006)

Accuracy Assessment of RANS Predictions of Active Flow Control for Hydrofoil Cavitation
by: Chandra Shekhar Pant, et al.
Published: (2020-06-01)

Cavitation Bubble Cloud Break-Off Mechanisms at Micro-Channels
by: Paul McGinn, et al.
Published: (2021-06-01)

LES of atomization and cavitation for fuel injectors
by: Ahmed, Aqeel
Published: (2019)

Isothermal compressible flow solver for prediction of cavitation erosion
by: Sunho Park, et al.
Published: (2019-01-01)

Midazolam Pre-medication in Paediatrics: Comparison of the Intranasal and Sublingual Routes by Using an Atomizer Spray
by: Narendra Kumar, et al.
Published: (2012-02-01)

Journal Bearing: An Integrated CFD-Analytical Approach for the Estimation of the Trajectory and Equilibrium Position
by: Franco Concli
Published: (2020-11-01)

Scale-Adaptive Simulation of Unsteady Cavitation Around a Naca66 Hydrofoil
by: Víctor Hidalgo, et al.
Published: (2019-09-01)

Development of a Eulerian Multi-Fluid Solver for Dense Spray Applications in OpenFOAM
by: Robert Keser, et al.
Published: (2020-09-01)

A CFD and experimental study on cavitation in positive displacement pumps: Benefits and drawbacks of the ‘full’ cavitation model
by: Aldo Iannetti, et al.
Published: (2016-01-01)

Investigation of cavitating flow luminescence for analytical spectroscopy
by: Whitfield, Claire Margaret Frances
Published: (2015)

Implementation and Development of an Eulerian Spray Model for CFD simulations of diesel Sprays
by: Pandal Blanco, Adrián
Published: (2016)

How to Improve the Performance Prediction of a Pump as Turbine by Considering the Slip Phenomenon
by: Tommaso Capurso, et al.
Published: (2018-07-01)

Innovative Meshing Strategies for Bearing Lubrication Simulations
by: Franco Concli, et al.
Published: (2020-04-01)

Development of a Segregated Compressible Flow Solver for Turbomachinery Simulations
by: Jesús Benajes, et al.
Published: (2014-01-01)

Numerical investigation on the effect of injection pressure on the internal flow characteristics for diethyl ether, dimethyl ether and diesel fuel injectors using CFD
by: Vijayakumar Thulasi, et al.
Published: (2011-01-01)

Numerical Simulation and Validation of Aerosol Particle Removal by Water Spray Droplets With OpenFOAM During the Fukushima Daiichi Fuel Debris Retrieval
by: Hui Liang, et al.
Published: (2020-06-01)

Numerical Simulation Analysis of Cavitation Performance of Tandem Propeller
Published: (2018-06-01)

Assessment of Cavitation Models for Compressible Flows Inside a Nozzle
by: Aishvarya Kumar, et al.
Published: (2020-08-01)

RANS and LES of multi-hole sprays for the mixture formation in piston engines
by: Khan, Muhammad
Published: (2014)

Modélisation du changement d’état solide-liquide. Application au stockage thermique par chaleur latente Adapté aux centrales solaires thermodynamiques
by: Pernot, Eric
Published: (2015)

Simulation aéro-thermo-mécanique des effets du feu sur les parois d'un milieu confiné : application à l'étude des thermo-altérations de la grotte Chauvet-Pont d'Arc
by: Salmon, Fabien
Published: (2019)

Cavitation phenomena and the admittance of air in the flow through an orifice
by: Yuhua, Yan
Published: (1989)

Contribution à l’étude de l’atomisation assistée d’un liquide : instabilité de cisaillement et génération du spray
by: Marty, Sylvain
Published: (2015)

Simulation 2D et 3D des écoulements cavitants : développement d'un algorithme original dans Code_Saturne et étude de l'influence de la modélisation de la turbulence.
by: Chebli, Rezki
Published: (2014)

Spray Drying of Food Suspensions: Upgrading Capabilities
by: Alekseev G., et al.
Published: (2019-06-01)

Caractérisation expérimentale de la pulvérisation, de l'allumage et de la combustion de bi-ergols. Application à la propulsion spatiale par ergols stockables
by: Indiana, Clément
Published: (2016)

Applying Different Strategies within OpenFOAM to Investigate the Effects of Breakup and Collision Model on the Spray and in-Cylinder Gas Mixture Attribute
by: P. Ghadimi, et al.
Published: (2016-01-01)

Design and optimization of a cavitating device for Congo red decolorization: Experimental investigation and CFD simulation
by: Zahra Abbas-Shiroodi, et al.
Published: (2021-03-01)

Numerical simulation of flows in an active air intake device of internal combustion engine with pulsated air flow
by: Kumar, Deepak
Published: (2018)

Laser cavitation bubbles at objects: Merging numerical and experimental methods
by: Koch, Max
Published: (2020)

Investigation of effect of nozzle geometry on spray with a 3-D Eulerian-Lagrangian spray model coupled with the nozzle cavitating flow
by: Guo Genmiao, et al.
Published: (2018-01-01)

Modélisation de l'écoulement polyphasique à l'intérieur et en sortie des injecteurs Diesel
by: Moreau, Jean-Baptiste
Published: (2005)

Turbulence and cavitation : applications in the NSMB and OpenFOAM solvers
by: Huang, Chao-Kun
Published: (2017)

Disinfection of Bacteria Escherichia Coli using Hydrodynamic Cavitation
by: Eva Fathul Karamah, et al.
Published: (2014-01-01)