Design of a cross section reduction extrusion tool for square bars
The objective of this project is to design a tool for moderate cross section reduction of bars that are deformed within a channel slider tool that is used for equal channel angular extrusion (ECAE). The bars that are deformed via ECAE have an initial square cross section with a nominal value of 1.00...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | en_US |
| Published: |
Texas A&M University
2007
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/1969.1/4880 |