Turbine performance mapping of the space-shuttle main engine high-pressure fuel turbopump

Turbine performance mapping of the space-shuttle main engine high-pressure fuel turbopump

Approved for public release; distribution unlimited. === The redesign, data acquisition system installation, and software development for the cold-flow Turbine Test Rig is reported. The turbine tested was the Space Shuttle Main Engine High Pressure Fuel Turbopump first stage 'Alternate Turbopum...

Full description

Bibliographic Details
Main Author:	Greco, Philip Andrew
Other Authors:	Hobson, Garth V.
Language:	en_US
Published:	Monterey, California. Naval Postgraduate School 2012
Online Access:	http://hdl.handle.net/10945/7566

Similar Items

Cold flow simulation of the alternate turbopump development turbine of the space shuttle main engine high pressure fuel turbopump
by: Rutkowski, Richard J.
Published: (2013)

Laser doppler velocimetry in the space-shuttle main engine high-pressure fuel turbopump
by: Southward, James D.
Published: (2012)

Experimental and computational investigation of cold-flow through the turbine of the space-shuttle main engine high-pressure fuel turbopump
by: McKee, Joseph R.
Published: (2012)

Design of a cold-flow test facility for the high-pressure fuel turbopump turbine of the space-shuttle main engine
by: Studevan, Colin C.
Published: (2012)

SPACE SHUTTLE MAIN ENGINE TURBOPUMP TRANSDUCER
by: Peterson, Tom J.
Published: (1983)

Model Identification for the Space Shuttle Main Engine High Pressure Oxidizer Turbopump
by: Brown, Joseph R.
Published: (1992)

Robust discrete estimation of the space shuttle main engine
by: Jensen, Jonathan Andrew
Published: (2009)

The Application of Counter-Rotating Turbine in Rocket Turbopump
by: Tang Fei, et al.
Published: (2008-01-01)

Testing of a microrocket engine turbopump
by: Jamonet, Laurent, 1978-
Published: (2005)

Numerical simulation of a two-stage turbine for turbopumps of liquid propellant rocket engine.
by: Fernando Cesar Ventura Pereira
Published: (1999)

A computational tool for the design and optimization of supersonic turbines with application on turbopump rocket engines
by: Marco Antonio Hidalgo Cunha
Published: (2012)

Failure detection and isolation for the Space Shuttle Main Engine
by: Ho, Nhut Tan, 1974-
Published: (2005)

The Pressure Field Measurement for Researching Inducer Flow of Booster Rocket Engine Turbopump
by: N. S. Dorosh, et al.
Published: (2014-01-01)

Design of a silicon microfabricated rocket engine turbopump
by: Deux, Antoine, 1975-
Published: (2005)

Characterization of cavitation instabilities in rocket engine turbopump inducers
by: Wang, Vincent, S.M. Massachusetts Institute of Technology
Published: (2017)

Preliminary performance characteristics of a microfabricated turbopump
by: Diez, Shana, 1980-
Published: (2006)

Analysis of Acoustic Cavitation Surge in a Rocket Engine Turbopump
by: Hideaki Nanri, et al.
Published: (2010-01-01)

A body force model for cavitating inducers in rocket engine turbopumps
by: Sorensen, William Alarik
Published: (2015)

Micro-scale turbopump blade cavitation
by: Pennathur, Sumita, 1978-
Published: (2005)

Observation of the exhaust plume from the space shuttle main engines using the microwave limb sounder
by: H. C. Pumphrey, et al.
Published: (2011-01-01)

Numerical Simulation of Turbopump Inducer Cavitating Behavior
by: O. Coutier-Delgosha, et al.
Published: (2005-01-01)

Design and Analysis System of a Turbopump Impeller
by: Jia-Ming Zhang, et al.
Published: (2004)

An experimental facility for the study of unsteady flow in turbopumps
by: Goulet, Nicolas R
Published: (2008)

Numerical Simulation of Turbopump Inducer Cavitating Behavior
by: Coutier-Delgosha O., et al.
Published: (2005-01-01)

PARAMETRIC VIBRATION OF THE ROTOR TURBOPUMP ASSEMBLY ON BALL BEARINGS
by: Яков Николаевич Иванов, et al.
Published: (2018-11-01)

Energy Saving in a Water Supply Network by Coupling a Pump and a Pump As Turbine (PAT) in a Turbopump
by: Armando Carravetta, et al.
Published: (2017-01-01)

Comprehensive Approach for Identification of Nonlinear Stiffness Characteristics of Bearing Supports for the Oxidizer Turbopump of the Liquid Rocket Engine
by: Pavlenko I., et al.
Published: (2018-11-01)

Simulation of Flow in Turbopump Vaneless and Vaned Diffusers with Fluid Injection
by: Ali Ogut, et al.
Published: (2000-01-01)

A Microfabricated Spiral-Groove Turbopump Supported on Microball Bearings
by: Waits, Christopher Mike, et al.
Published: (2012)

The study of performance loss for an aero engine high pressure turbine
by: Shih-Chia Wang, et al.
Published: (2001)

Engineering design and political choice: the space shuttle 1969-1972
by: Pace, Scott
Published: (2005)

Dynamic model based identification of cavitation compliance and mass flow gain factor in rocket engine turbopump inducers
by: Wan, Y, et al.
Published: (2021)

Study of Manufacturing Processes for Liquid Rocket Turbopump Impellers: Test and Analysis
by: Ekaterina Sergueievna Zink, et al.
Published: (2020-03-01)

An Overview of Bearing Candidates for the Next Generation of Reusable Liquid Rocket Turbopumps
by: Jimin Xu, et al.
Published: (2020-03-01)

SPACE SHUTTLE PAYLOAD INTERROGATOR
by: Zelon, Michael
Published: (1982)

Video Encoding for the Space Shuttle
by: Habibi, A., et al.
Published: (1978)

SPACE SHUTTLE INFRARED PYROMETRY
by: Patton, Victor V. C.
Published: (1983)

Evaluation on Liquid Fueled with Hydrogen Injection Micro Turbine Engine Performance
by: Huang-JhihZhuang, et al.
Published: (2013)

A New Era of Space Shuttle
by: Sun Kyu Kim
Published: (1985-06-01)

Space Shuttle Antenna Subsystem Design
by: Ellis, H., et al.
Published: (1974)