Determination of oil film thickness in partial sleeve type bearings by electrical means
Approved for public release; distribution is unlimited === This investigation was performed at the United States Naval Engineering Experimental Station during the months of February and March, 1949. While casting about in January for a suitable topic for investigation, Captain Liles W. Creighton gen...
Main Author: | Shiflette, William Marshall |
---|---|
Other Authors: | Terwilliger, C. V. O. |
Published: |
Annapolis, Maryland: U.S. Naval Postgraduate School
2013
|
Online Access: | http://hdl.handle.net/10945/36328 |
Similar Items
-
On the experimental determination of the minimum oil film thickness in a plain journal bearing.
by: Brotherton, William DeRoy.
Published: (2012) -
Influence of Spiral Angle on the Performance of Spiral Oil Wedge Sleeve Bearing
by: Li-li Wang, et al.
Published: (2018-01-01) -
The effect of roller geometry on the oil film thickness in roller bearings
by: Bahadoran, Hormoz
Published: (1974) -
Determination of thin film refractive index and thickness by means of film phase thickness
by: Nenkov Milen, et al.
Published: (2008-06-01) -
Diagnostics of Rolling Bearing in Operation by Oil Film Thickness and Control Algorithm
by: A. T. Skoibeda, et al.
Published: (2005-12-01)