Design and hardware-in-the-loop implementation of optimal canonical maneuvers for an autonomous planetary aerial vehicle

• Main Author: Savage, Marta K.
• Other Authors: Karpenko, Mark
• Published: Monterey, California. Naval Postgraduate School 2013
• Online Access: http://hdl.handle.net/10945/27898

A truly autonomous aerial vehicle is required for conducting aerial missions at distances great enough to cause time lag in communications, such as on other planets. This level of autonomy also reduces the requirement for trained UAV pilots to fly round-the-clock missions. Development of optimal canonical maneuvers is a step towards achieving real-time optimal trajectory generation and more fully autonomous aircraft capable of independent and efficient flight maneuvering. This thesis develops a model of the MONARC aerial vehicle and sets up the optimal control problem for generating canonical maneuver profiles. The DIDO optimal control software is used in order to generate time-optimal trajectories for flight implementation on the MONARC test bed. The ability of the MONARC to fly the optimal trajectories is verified using a 6DOF SIMULINK model. Several canonical maneuvers were developed and optimized to generate trajectories for multiple flight scenarios. One of these cases is analyzed for implementation as part of a Hardware-in-the-Loop (HIL) simulation. This HIL test will verify that the optimization model has sufficient fidelity to be used to generate optimal trajectories that can be physically flown by the MONARC.