Residual stresses and deflections in complex shapes formed by laser bending.

Residual stresses and deflections in complex shapes formed by laser bending.

Bibliographic Details
Main Author:	Biegeleisen, Louis King
Other Authors:	NA
Language:	en_US
Published:	2012
Online Access:	http://hdl.handle.net/10945/22077

Similar Items

Residual stresses and deflections in complex shapes formed by laser bending
by: Biegeleisen, Louis King, 1952-
Published: (2005)

Theoretical analysis on shear-bending deflection of a ring-shape piezoelectric plate
by: Zejun Yu, et al.
Published: (2016-02-01)

Residual stresses and deflections due to clamping in indeterminate structures
by: Martin, George Walter
Published: (2006)

Part deflection and residual stresses in laser powder bed fusion of H13 tool steel
by: Morteza Narvan, et al.
Published: (2021-06-01)

Bending deflection reinforced concrete elements determination
by: Kochkarev Dmitriy, et al.
Published: (2018-01-01)

The Finite Element Analysis of Welding Residual Stresses and Deflections.
by: Mohr,San, et al.
Published: (1994)

CALCULATION OF RESIDUAL STRESSES RESULTING FROM BENDING OF COLD FORMED STEEL BARS
by: Gökmen ATLIHAN, et al.
Published: (2007-01-01)

Concentrated stress location areas for welded tubular T-joints under deflected bending load
by: Chouha E., et al.
Published: (2019-01-01)

Evaluation of bending moment and deflection of cantilever supported excavations
by: Seyed Hamid Yasrebi, et al.
Published: (2017-11-01)

Influence of bending deflection rate on properties of fibrous mortar
by: Metwally Abd Allah Abd el Aty
Published: (2013-04-01)

An Analysis and Improvement on the Deflection of Connector Contacts due to Bending
by: Kuo-Jui Chan, et al.
Published: (2008)

Experimental and Analytical Study of Bending Stresses and Deflections in Curved Beam Made of Laminated Composite Material
by: Assma Hassan Ismail
Published: (2017-12-01)

Experimental and Analytical Study of Bending Stresses and Deflections in Curved Beam Made of Laminated Composite Material
by: Assma Hassan Ismail
Published: (2014-12-01)

Calculation bending deflection and stress for corrugated core sandwich panels employing equivalent stiffness method
by: Xiaoming WANG, et al.
Published: (2021-04-01)

The influence of Mold Deflection on the Dimensions and Residual Stresses of Thin-Wall Products
by: Shen-Hong Chen, et al.
Published: (2009)

Elastic and Plastic Bar Bending and Residual Stresses
by: S. S. Makarovich, et al.
Published: (2005-10-01)

A study of the stresses and deflections in a right angled joint between two tubes subjected to pure bending
by: Carless, Harold Alfred
Published: (2006)

Determining elastic modulus of the material by measuring the deflection of the beam loaded in bending
by: Jasmina Miljojković, et al.
Published: (2017-01-01)

Modelling of the vertical deflection of ferroelectric bending tongues loaded at their free end
by: Juliette Cardoletti, et al.
Published: (2019-02-01)

Increase of bending strength and maximum deflection of concrete reinforced with CFRP strips
by: Ben Goichi, et al.
Published: (2011-06-01)

Modulation and deflection of laser beams
by: Dore, M. J.
Published: (1968)

Laser edge forming to increase the bending radius in hemming
by: Woizeschke Peer, et al.
Published: (2018-01-01)

GRAVITY DEFLECTIONS AND SHAPE OPTIMIZATION FOR LIGHTWEIGHTED MIRRORS.
by: Iraninejad, Bijan.
Published: (1982)

Deflection and bending moments amplitude distribution at the forced oscillations of the Euler-Bernoulli beam
by: Nikolay Suryaninov, et al.
Published: (2017-01-01)

Load deflection analysis for determining mechanical properties of thin films with tensile and compressive residual stresses
by: Bulsara, Mayank T. (Mayank Thakordas)
Published: (2007)

Identifying the Characteristics of Laminated Wood Based on the Values of Deflection Measured during its Bending
by: Daniel Ruman, et al.
Published: (2017-02-01)

Bending Behavior and Deflection Prediction of High-Strength SFRC Beams under Fatigue Loading
by: Dan-ying Gao, et al.
Published: (2020-05-01)

USE OF ELECTRO-LEVELS TO OBTAIN DEFLECTION AND BENDING MOMENT IN CONCRETE FACED ROCKFILL DAMS
by: DANILO TOLEDO RAMOS
Published: (2009)

The influence of freeform bending process parameters on residual stresses for steel tubes
by: Daniel Maier, et al.
Published: (2021-05-01)

Spatial Distribution Evolution of Residual Stress and Microstructure in Laser-Peen-Formed Plates
by: Zheng Zhang, et al.
Published: (2020-08-01)

Light deflecting of thin laser cut panels
by: Chih-Ping Wang, et al.
Published: (2005)

Making Light Work of Metal Bending: Laser Forming in Rapid Prototyping
by: Adam L. Bachmann, et al.
Published: (2020-12-01)

The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members
by: Pástor Miroslav, et al.
Published: (2019-05-01)

An investigation of the stresses and deflections of swept plates
by: Gilkeson, Fillmore Bolling
Published: (2012)

An investigation of the stresses and deflections of swept plates.
by: Chandler, Ralph Stewart
Published: (2012)

Analysis of Pure Bending Vertical Deflection of Improved Composite Box Girders with Corrugated Steel Webs
by: Chi Ma, et al.
Published: (2021-01-01)

Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
by: Jauhar Fajrin, et al.
Published: (2017-03-01)

Effect of Selected Factors on the Bending Deflection at the Limit of Proportionality and at the Modulus of Rupture in Laminated Veneer Lumber
by: Adam Sikora, et al.
Published: (2019-05-01)

Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load
by: Jauhar Fajrin, et al.
Published: (2017-03-01)

[en] USE OF ELECTRO-LEVELS TO OBTAIN DEFLECTION AND BENDING MOMENT IN CONCRETE FACED ROCKFILL DAMS
by: DANILO TOLEDO RAMOS
Published: (2010)

Cannot write session to /tmp/vufind_sessions/sess_r0e5722gj56t2bohb3r0bmldih