Effect of temperature and strain rate on microstructure of a deformed superplastic Al-10%Mg-0.1%Zr alloy.

Effect of temperature and strain rate on microstructure of a deformed superplastic Al-10%Mg-0.1%Zr alloy.

Bibliographic Details
Main Author:	Berthold, Dudley B.
Other Authors:	NA
Language:	en_US
Published:	2012
Online Access:	http://hdl.handle.net/10945/21297

Similar Items

Effect of strain and strain rate on the microstructure of a superplastically deformed Al-10%Mg-0.1%Zr alloy.
by: Alcamo, Mark Edward
Published: (2012)

The effect of processing and superplastic deformation on ambient ductility of Al-10%Mg-0.1%Zr.
by: Solomos, Dimosthenis K.
Published: (2012)

Mechanical characteristics of a superplastic aluminum-10.2%Mg-0.1%Zr alloy.
by: Hartmann, Thomas S.
Published: (2012)

Retained ambient temperature properties of superplastically deformed Al-10%Mg-0.1%Zr, Al-10%Mg-0.5%Mn and Al-10%-0.4%Cu alloys.
by: Klankowski, Karl A.
Published: (2012)

The deformation characteristics and microstructural dynamics of an Al-10Mg-0.1Zr alloy
by: Buckley, James F.
Published: (2013)

Correlation of processing, microstructure, and superplasticity in an Al-MG-ZR alloy.
by: Lyle, Peter C.
Published: (2012)

Superplastic Flow and Deformation Mechanism of the Rolled Al-Mg-Li-Sc-Zr Alloy with Banded Microstructure
by: Chengzhi Zhang, et al.
Published: (2021-03-01)

High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling
by: Olga Yakovtseva, et al.
Published: (2020-05-01)

A calorimetric study of the microstructures of a thermomechanically processed Al-10.0% Mg-0.1% Zr alloy.
by: Andrews, James N. Jr.
Published: (2012)

A High-Strain-Rate Superplasticity of the Al-Mg-Si-Zr-Sc Alloy with Ni Addition
by: Andrey Mochugovskiy, et al.
Published: (2021-04-01)

MICROSTRUCTURAL CONTROL FOR HIGH STRAIN RATE SUPERPLASTICITY AND DEFORMATION CHARACTERISTICS
by: Mabuchi, Mamoru
Published: (2009)

Superplastic Tensile Deformation Behavior and Microstructural Evolution of Al–Zn–Mg–Cu Alloy
by: Guangyu Li, et al.
Published: (2019-08-01)

Effect of heating rate to test temperature on superplastic response in an A1-8%Mg-1%Li-0.2%Zr alloy
by: O'Mara, Duncan F.
Published: (2013)

Processing, microstructure and superplasticity in Al-Mg-Mn alloys.
by: Meyer, Chris D.
Published: (2013)

Processing Routes and Deformation Characteristics of High Temperature and High Strain Rate Superplasticity in Aluminum Alloys and Composites
by: Bai-Yao Lou, et al.
Published: (1999)

Superplastic deformation of titanium alloys
by: Ingelbrecht, Christopher Douglas
Published: (1985)

Analysis on Cavitation in AZ-Series Mg Alloys during Superplastic Deformation
by: Ching-Jen Lee, et al.
Published: (2003)

Superplasticity in a thermo-mechanically processed aluminum-10.2%Mg-0.52%Mn alloy.
by: Mills, Max E.
Published: (2012)

Hot compressive deformation behaviors of Mg–10Gd–3Y–0.5Zr alloy
by: Tingting Zheng, et al.
Published: (2016-02-01)

Experimental Investigation of the Effect of Temperature and Strain Rate on the Superplastic Deformation Behavior of Ti-Based Alloys in the (α+β) Temperature Field
by: Ahmed O. Mosleh, et al.
Published: (2018-10-01)

Superplastic Deformation of TC6 Alloy
by: DING Ling, et al.
Published: (2016-12-01)

Development and Analysis of Low Temperature and High Strain Rate Superplasticity in High-Ratio Extruded AZ31 Mg Alloys
by: Hsuan-kai Lin, et al.
Published: (2005)

An approach to low temperature high strain rate superplasticity in aluminum alloy 2090.
by: Reedy, Michael Wayne
Published: (2013)

Microstructures and High Temperature Tensile Properties of As-Aged Mg-6Zn-1Mn-4Sn-(01, 0.5 and 1.0) Y Alloys
by: Guangshan Hu, et al.
Published: (2018-12-01)

SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING
by: Jan Dutkiewicz, et al.
Published: (2017-09-01)

High strain rate superplasticity of aluminium-magnesium alloys
by: Harrison, Andrew William
Published: (2003)

Superplasticity of a nano-grained Mg-Gd-Y-Zr alloy processed by high-pressure torsion
by: Alizadeh, R., et al.
Published: (2016)

Microstructure and High Temperature Tensile Properties of Mg–10Gd–5Y–0.5Zr Alloy after Thermo-Mechanical Processing
by: Guohua Wu, et al.
Published: (2018-11-01)

Effect of Heating Rate on Superplasticity Properties and The Superplastic Cavitation of AA 5083 Al-Mg-Mn Alloy
by: Tang, et al.
Published: (2005)

Superplasticity and post-deformation properties in titanium alloys
by: Hassan, Mohamad Agha
Published: (1991)

Uniaxial and Biaxial Superplastic Deformations in Al Alloy
by: Lee, Sei-Ching, et al.
Published: (1994)

Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing
by: Reza Alizadeh, et al.
Published: (2014-07-01)

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation
by: Qian Cheng, et al.
Published: (2021-03-01)

Effects of annealing treatments on superplasticity in a thermomechanically processed aluminum-10.2%Mg-0.52%Mn alloy.
by: Stengel, Alta Fern
Published: (2012)

A study of a superplastic Al-Cu-Zr alloy
by: Davenport, John
Published: (1976)

A study of the fatigue behavior of an Al-6Zn-2Mg-0.1Zr alloy
by: Heikkenen, Herman Charles
Published: (2006)

Development of Low Temperature Superplasticity and Analyses of Deformation Mechanisms in 5083 Al Alloys
by: I-Ching Hsiao, et al.
Published: (2001)

Microstructural Study of a Mg–Zn–Zr Alloy Hot Compressed at a High Strain Rate
by: Jing You, et al.
Published: (2020-05-01)

Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
by: Ruidi Li, et al.
Published: (2019-04-01)

The Effect of Annealing on the Microstructure and Properties of Ultralow-Temperature Rolled Mg–2Y–0.6Nd–0.6Zr Alloy
by: Hongmin Yu, et al.
Published: (2021-02-01)