An experimental investigation of coolant mixing in a wire wrapped LMFBR blanket subassembly [Pt.1]

An experimental investigation of coolant mixing in a wire wrapped LMFBR blanket subassembly [Pt.1]

Bibliographic Details
Main Author:	Oosterman, Carl Henry
Language:	en_US
Published:	Massachusetts Institute of Technology 2012
Online Access:	http://hdl.handle.net/10945/20856

Similar Items

An experimental investigation of coolant mixing in a wire wrapped LMFBR blanket subassembly [Pt.2]
by: Oosterman, Carl Henry
Published: (2012)

Investigations in coolant mixing and flow split for LMFBR wire wrapped assemblies.
by: Chiu, Chong.
Published: (2021)

Campers wrapped in blankets, Philip's Mountain, Maine, June 1915.
Published: ()

A passively-safe fusion reactor blanket with helium coolant and steel structure
by: Crosswait, Kenneth Mitchell
Published: (2005)

Two campers wrapped in blankets, Philip's Mountain, Maine, June 1915.
Published: ()

Use of facia lata graft blanket wrap to prevent fistulas in hypospadias repair
by: Gupta Vipul, et al.
Published: (2006-01-01)

Relative performance of different LMFBR lattice configurations under natural circulation.
by: Newton, John William
Published: (2012)

Experiment designing in operating investigations of subassembly of the marine energy systems
by: Monieta Jan
Published: (2018-01-01)

Subassembly Extraction in Assembly Sequence Planning
by: Song-Dar Wu, et al.
Published: (1993)

Analysis of the mechanical response of LMFBR fuel clads subjected to in-service property variations
by: Subbaraman, Ganesan
Published: (2014)

Design, Simulation and Experimental Measurements of Four-Channel CWDM Optical Subassembly Module
by: Ying-Ching Shih, et al.
Published: (2004)

MODELING THE BEHAVIOR AT LAUNCHING FOR A SATELLITE’S SUBASSEMBLY
by: Sorin DRĂGHICI, et al.
Published: (2014-11-01)

The Problem of Reliability Allocation in the Subassemblies of Rail Vehicles
by: Szkoda Maciej, et al.
Published: (2019-06-01)

Experimental investigation of sodium boiling heat exchange in fuel subassembly mockup for perspective fast reactor safety substantiation
by: R.R. Khafizov, et al.
Published: (2015-10-01)

Numerical Investigations of Flow Around a Wire-wrapped Rotating Cylinder
by: Begum, Assma
Published: (2018)

Constitutive correlations for wire-wrapped subchannel analysis under forced and mixed convection conditions
by: Cheng, Shih-kuei, Ph. D. Massachusetts Institute of Technology
Published: (2005)

Fluid mixing studies in a hexagonal 37-pin, wire wrap rod bundle
by: Chiu, King-Wo Thomas
Published: (2005)

Wire Wrapped Joints—A Review
by: P. M. A. Sollars
Published: (1974-01-01)

Subchannel Analysis of Wire Wrapped SCWR Assembly
by: Jianqiang Shan, et al.
Published: (2014-01-01)

3D Transient CFD Simulation of an In-Vessel Loss-of-Coolant Accident in the EU DEMO WCLL Breeding Blanket
by: Froio, A., et al.
Published: (2023)

The Simulation and Experiment of Post-Weld-Shift in Optical Subassembly
by: Tzu-Chun Huang, et al.
Published: (2005)

Predicting manufacturing performance of new radar subassembly designs
by: Lund, Mack R. (Mack Roger), 1968-
Published: (2014)

Design of an Alignment Tolerant Miniature Optical Subassembly Module
by: Hak-Soon Lee, et al.
Published: (2014-01-01)

PIV measurement and numerical investigation on flow characteristics of simulated fast reactor fuel subassembly
by: Cheng Zhang, et al.
Published: (2020-05-01)

Investigation of Coolant Local Hydrodynamics in the Mixed Core of the VVER Reactor
by: S. M. Dmitriev, et al.
Published: (2020-03-01)

Coolant mixing in pressurized water reactors
by: Grunwald, G., et al.
Published: (2010)

Coolant mixing in pressurized water reactors
by: Grunwald, G., et al.
Published: (2010)

Experimental approach to investigate the dynamics of mixing coolant flow in complex geometry using PIV and PLIF techniques
by: Hutli Ezddin, et al.
Published: (2015-01-01)

Numerical investigations of mixing non-isothermal streams of sodium coolant in T-branch
by: Andrey A. Aksenov, et al.
Published: (2017-02-01)

Wire wrapped fuel pin hexagonal arrays for PWR service
by: Diller, Peter Ray
Published: (2008)

Thermal-hydraulic Assessment of Seven Wire-wrapped rod Bundle
by: Lyu Kefeng, et al.
Published: (2020-01-01)

ASPECTS REGARDING THE FORMATION CHAINS SIZES TO SUBASSEMBLIES OF THE FIELD THE MECHANICS HEAVY
by: Rădulescu Constanţa
Published: (2012-05-01)

RESEARCH ON THE STUDY OF MATERIAL DEFECTS AND SOMECOAL MILLS SUBASSEMBLIES LIFE TIME
by: Cristina LAPADUSI, et al.
Published: (2013-05-01)

Seismic response and design of subassemblies for multi-storey prestressed timber buildings.
by: Iqbal, Md Asif
Published: (2011)

Seismic behaviour of beam-column joint subassemblies reinforced with steel fibres
by: Liu, Cong
Published: (2008)

Choosing the method for determining angular motions of motor vehicle electromechanical subassemblies
by: O. Dziubenko, et al.
Published: (2021-03-01)

Structural Behavior of Reinforced Concrete Elements and Subassemblies under Fire Conditions
by: Mohammad, Mahdi Raouffard
Published: (2018)

Numerical investigation on vortex behavior in wire-wrapped fuel assembly for a sodium fast reactor
by: Min Seop Song, et al.
Published: (2019-06-01)

A New Transmission Theory of “Global Dynamic Wrap Angle” for Friction Hoist Combining Suspended and Wrapped Wire Rope
by: Yongbo Guo, et al.
Published: (2020-02-01)

MIXING LOSSES INVESTIGATION DOWNSTREAM OF TURBINE BLADE CASCADE WITH COOLANT FLOW BLOWING
by: ASSIM HAMEED YOUSIF, et al.
Published: (2011-04-01)

Cannot write session to /tmp/vufind_sessions/sess_sp2tpol87md84qg9m76alddc89