An investigation of elevated temperature fatigue crack initiation in 2 1/4 Cr-1 Mo low alloy steel.

An investigation of elevated temperature fatigue crack initiation in 2 1/4 Cr-1 Mo low alloy steel.

Bibliographic Details
Main Author:	Keifer, Orion P.
Other Authors:	NA
Language:	en_US
Published:	Monterey, California. Naval Postgraduate School 2012
Online Access:	http://hdl.handle.net/10945/19407

Similar Items

Fatigue crack growth at elevated temperatures in a 9%Cr 1%Mo steel
by: Cotterill, Paul John
Published: (1989)

Type IV cracking in 1¼Cr - ½Mo low alloy steel welds
by: Stratford, G. C.
Published: (1995)

Mechanisms of elevated temperature fatigue damage in 2 1/4 Cr - 1 Mo steel.
by: Vining, Pierre G.
Published: (2012)

The effects of environment and dwell on high temperature fatigue crack growth of 2 1/4 Cr - 1 Mo steel.
by: Kamen, John S.
Published: (2012)

On Overloads and the Rate of Fatigue Crack Growth in a 9CR-1MO Steel
by: Yang, Z., et al.
Published: (1991-06-01)

High temperature crack growth in 2.25 Cr - 1 Mo steel
by: Tarafder, Soumitra
Published: (1990)

Creep-fatigue crack growth behavior of 1%Cr-1%Mo-1/4%V rotor steel
by: Adefris, Negussie Belihu
Published: (2007)

Rotational bending fatigue life and fatigue crack initiation mechanism of Cr4Mo4V bearing steel
by: GUO Jun, et al.
Published: (2019-07-01)

The role of inclusions in the initiation and propagation of fatigue cracks in low alloy steels
by: Crofton, P. S. J.
Published: (1980)

Temperature dependent crack initiation of 42CrMo4 steel at high loading rates
by: Henschel Sebastian, et al.
Published: (2018-01-01)

Stress assisted hydrogen attack cracking in 2.25CR-1MO steels at elevated tempatures /
by: Chen, Long-Ching
Published: (1993)

The study of fatigue crack propagation in martensitic and baintic structures of a 1.5% Ni-CR-Mo steel
by: Nicholson, C. E.
Published: (1972)

Fatigue crack growth resistance of the austenitic stainless steel Alloy 709 at elevated temperatures
by: Suyang Yu, et al.
Published: (2020-11-01)

Effect of hydrogen on fatigue crack growth of quenched and tempered CrMo(V) steels
by: Peral Luis Borja, et al.
Published: (2018-01-01)

Effect of Underload Cycles on Oxide-Induced Crack Closure Development in Cr-Mo Low-Alloy Steel
by: Pavel Pokorný, et al.
Published: (2021-05-01)

The high temperature performance of ½Cr ½Mo ¼V/ 2¼Cr1Mo steel weldments
by: Parsons, A. W. J.
Published: (1995)

Effect of strength, load ratio and environment on near-threshold fatigue crack propagation of 2 1/4 Cr - 1 Mo steel
by: Zamiski, Gerald Frank
Published: (2007)

Early damage and fatigue crack initiation at ambient and elevated temperatures in heat resistant austenitic steel
by: Polák Jaroslav, et al.
Published: (2018-01-01)

Fatigue crack growth in a low-alloy steel
by: Musuva, J. K.
Published: (1980)

A comparative study of ductile fracture in the 2.25% Cr - 1% Mo and 9% Cr - 1% Mo alloy steels
by: Zhang, Jian Guo
Published: (1987)

Fatigue Crack Growth of 2 1/4Cr-1Mo Welds Exposed in Gaseous Hydrogen
by: Liu, Chih-Chung, et al.
Published: (1998)

Crack initiation and growth at elevated temperatures in engineering steels
by: Davies, Catrin Mair
Published: (2006)

Fatigue and corrosion-fatigue in Cr-Mo steel in biaxial tension
by: Gaur, Vidit
Published: (2016)

Rotating bending fatigue properties of medium alloy Cr and Mo nitriding bearing steel
by: Nianlun YU, et al.
Published: (2019-08-01)

Low cycle fatigue of modified 9Cr-1Mo weldments
by: Payne, R. Kelly
Published: (2006)

The Effect of Heat Treatment on Low Temperature Impact Toughness of Low Alloy Ni-Cr-Mo Cast Steel
by: Xiang-Shan Yang, et al.
Published: (2010)

The study of torsional fatigue in Ni-Cr-Mo steel
by: Yu-Cyuan Lin, et al.
Published: (2006)

Fatigue crack initiation in rail steels
by: St. Lawrence, Sterling
Published: (2013)

Fatigue crack initiation in rail steels
by: St. Lawrence, Sterling
Published: (2013)

1Cr-0.5Mo Alloy Steel Phase Transformation Research
by: Su Yu-Feng, et al.
Published: (1993)

Bending Fretting Fatigue Characteristics of 18CrNiMo7-6 Alloy Steel
by: SHEN Yan-tuan, et al.
Published: (2017-07-01)

Study on the Corrosion Fatigue Properties of 12Cr1MoV Steel at High Temperature in Different Salt Environments
by: Jianjun He, et al.
Published: (2019-07-01)

Fatigue Crack Propagation Under Random Loading in Low Alloy Steels
by: Hibberd, R. D.
Published: (1977)

Experimental Investigation of Fatigue Crack Growth Behavior of the 2.25Cr1Mo0.25V Steel Welded Joint Used in Hydrogenation Reactors
by: Yan Song, et al.
Published: (2021-03-01)

High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks
by: S. Foletti, et al.
Published: (2013-09-01)

High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks
by: S. Foletti, et al.
Published: (2013-10-01)

High-Temperature Precipitation Design-of-Experiments Simulation in Low-Alloy Cr–Mo–Ni Hot Forging Steel
by: Roberto Gonzalez-Ojeda, et al.
Published: (2021-06-01)

The Research of the Creep behavior for the Cr-Mo Alloy Steel
by: Kuei-Cheng Lee, et al.
Published: (2004)

The initiation and growth of fatigue cracks in titanium alloys
by: Brown, C. W.
Published: (1981)

Creep-fatigue crack growth in Cr-Mo-V base material and weldments
by: Grover, Parmeet S.
Published: (2008)

Cannot write session to /tmp/vufind_sessions/sess_snn6l8clebboulmsn63kktf3lg