Calculation of the oxide growth rate of 2-1/4 Cr - 1 Mo steel in air and the subsequent measurement of the strain required to crack the oxide
Approved for public release, distribution is unlimited === This study examined the growth rate of 2-1/4 Cr - 1 Mo steel in air under isothermal growth conditions. Two oxidizing temperatures were used, 403 degrees and 499 degrees, for five specimens each with oxidizing times varying from six hours t...
Main Author: | Langdon, Robert Lawrence |
---|---|
Other Authors: | Challenger, K. D. |
Language: | en_US |
Published: |
Monterey, California; Naval Postgraduate School
2012
|
Online Access: | http://hdl.handle.net/10945/18931 |
Similar Items
-
The oxidation and carburisation of Fe-9%Cr-1%Mo steel
by: Baxter, A. G.
Published: (1987) -
On Overloads and the Rate of Fatigue Crack Growth in a 9CR-1MO Steel
by: Yang, Z., et al.
Published: (1991-06-01) -
High temperature crack growth in 2.25 Cr - 1 Mo steel
by: Tarafder, Soumitra
Published: (1990) -
Type IV cracking in 1¼Cr - ½Mo low alloy steel welds
by: Stratford, G. C.
Published: (1995) -
Effect of Underload Cycles on Oxide-Induced Crack Closure Development in Cr-Mo Low-Alloy Steel
by: Pavel Pokorný, et al.
Published: (2021-05-01)