Modified design of a scale model of a cylindrical rotor, steam turbine generator.

Modified design of a scale model of a cylindrical rotor, steam turbine generator.

Bibliographic Details
Main Author:	Williams, Billy Bryan.
Language:	en_US
Published:	Massachusetts Institute of Technology 2012
Online Access:	http://hdl.handle.net/10945/16258

Similar Items

Weld repair of steam turbine rotors
by: Mitchell, K. C.
Published: (1999)

The analysis of failure causes of the rotor shaft of steam turbines
by: P. Trebuňa, et al.
Published: (2017-01-01)

Computation of transient temperatures and stresses in steam turbine rotors
by: Chow, Chi-Loong
Published: (1965)

Integrated Reverse Engineering Strategy for Large-Scale Mechanical Systems: Application to a Steam Turbine Rotor
by: Alexandros Arailopoulos, et al.
Published: (2018-10-01)

Steam Turbine Rotor Stress Control through Nonlinear Model Predictive Control
by: Stefano Dettori, et al.
Published: (2021-07-01)

On the scaling of wind turbine rotors
by: H. Canet, et al.
Published: (2021-05-01)

Thermosyphon Method for Cooling the Rotor Blades of High-Temperature Steam Turbines
by: Bogomolov Alexander R., et al.
Published: (2016-01-01)

Life assessment of the disc rim of low pressure steam turbine rotors
by: Chen,Chun-Yang, et al.
Published: (2000)

Multi Rotor Wind Turbine Design And Cost Scaling
by: Verma, Preeti
Published: (2013)

Aerodynamic and Structural Strategies for the Rotor Design of a Wind Turbine Scaled Model
by: Sara Muggiasca, et al.
Published: (2021-04-01)

Rotor Design and Testing of a Micro Air Turbine Generator
by: Lu, Ying-Yen, et al.
Published: (2013)

CHOICE OF OPMIMUM MATERIAL FOR STRENGTHENING THE ENTRANCE EDGES OF STEAM TURBINE ROTOR BLADES
by: D. Gluschcova, et al.
Published: (2016-12-01)

The optimisation of steam turbine design
by: Wakeley, Guy Richard
Published: (1997)

Design and Prototyping of Directly Driven Outer Rotor Permanent Magnet Generator for Small Scale Wind Turbines
by: Toomas Vaimann, et al.
Published: (2018-01-01)

Bending fault evaluation for the HP-IP rotor system of the nuclear steam turbine based on the dynamic model
by: Zhang Yang, et al.
Published: (2017-08-01)

Weld Repair of Steam Turbine Rotor with 12 Cr Weld to Mitigate Corrosion Issues
by: Gowreesan Vamadevan, et al.
Published: (2019-01-01)

Optimization on start-up process of high-pressure rotor for large power steam turbine
by: Du Qiu-Wan, et al.
Published: (2016-01-01)

Theoretical Investigation of Stresses Induced at Blade Mounting Locations in Steam Turbine Rotor System
by: Prasad D. Kiran, et al.
Published: (2019-06-01)

Detecting seal-to-rotor rubs within steam turbines : the suitability of acoustic emission monitoring
by: Leahy, Mark John
Published: (2006)

Electrochemical reactivity and stress corrosion cracking of turbine rotor steel in solutions of steam impurities /
by: Somuah, Samuel Kwabena
Published: (1982)

Improving the Torque Vibrations on Shafts and Blades of a Large-scale Steam Turbine Generator Set
by: Chi-Hshiung Lin, et al.
Published: (2000)

Russian and foreign steam generators for NPP power units with wet steam turbines
by: Egorov Mikle, et al.
Published: (2020-01-01)

A CFD Analysis of Steam Flow in the Two-Stage Experimental Impulse Turbine with the Drum Rotor Arrangement
by: Yun Kukchol, et al.
Published: (2016-01-01)

Steam Turbine Nozzles and Blades Design
by: Lee,Fu-Hi, et al.
Published: (1994)

New blade tip-timing system for measuring rotor blade vibration of steam and gas turbines
by: Kowaleczko Piotr, et al.
Published: (2019-01-01)

On the Application of Small-Scale Turbines in Industrial Steam Networks
by: Ansgar Weickgenannt, et al.
Published: (2021-05-01)

Advanced controller design for speed control in a steam turbine coupled to DC generator
by: Hernando González-Acevedo, et al.
Published: (2018-01-01)

Design criteria and performance of steam turbines in a CPP plant for electrical power generation
by: Qur'an, Omar Ali Sammour
Published: (2002)

The Development of Supercritical Steam Turbine Generation Units in Taiwan
by: Li-Hsin Lai, et al.
Published: (2016)

Rotor Loading Characteristics of a Full-Scale Tidal Turbine
by: Magnus Harrold, et al.
Published: (2019-03-01)

Generator design for, and modelling of, small-scale wind turbines
by: Stannard, Nick
Published: (2008)

A New Steam Turbine Model for Utility System Design and Optimization
by: L. Sun, et al.
Published: (2014-08-01)

Analytic springback prediction in cylindrical tube bending for helical tube steam generator
by: Kwanghyun Ahn, et al.
Published: (2020-09-01)

The Sonic Surface in the Inter-Blade Channel of the Last Stage Rotor Wheel in the Steam Turbine of Large Output
by: Luxa Martin
Published: (2018-01-01)

Failure analysis of Rotating Blades of Lowpressure Steam Turbine Rotors and Possibility of Prediction Corrosion-fatigue Ruptures
by: Kasl Josef, et al.
Published: (2018-01-01)

IMPROVED WEIGHT FUNCTIONS FOR STRESS INTENSITY FACTORS OF SEMI ELLIPTICAL CRACK IN STEAM TURBINE ROTOR SYSTEM
by: Damarla Kiran Prasad, et al.
Published: (2019-03-01)

Comprehensive rotor service life study for high & intermediate pressure cylinders of high power steam turbines
by: V. Peshko, et al.
Published: (2016-12-01)

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Ihor A. Palkov, et al.
Published: (2019-09-01)

Finite Element Analysis Design of a Split Rotor Bracket for a Bulb Turbine Generator
by: Yongyao Luo, et al.
Published: (2013-01-01)

Optimization of Design of Steam Turbine Exhaust Conduits
by: A. S. Goldin, et al.
Published: (2014-01-01)