A comparison of fatigue crack propagation in Inconel 625 and 3.25 Ni steel.

A comparison of fatigue crack propagation in Inconel 625 and 3.25 Ni steel.

Show other versions (1)

Bibliographic Details
Main Author:	Long, Thomas Albert.
Language:	en_US
Published:	Massachusetts Institute of Technology 2012
Online Access:	http://hdl.handle.net/10945/16029

Similar Items

A comparison of fatigue crack propagation in Inconel 625 and 3.25 Ni steel.
by: Long, Thomas Albert
Published: (2015)

Prevent Cracking in Deposition of Carbon Steel on Inconel 625
by: Morsy M. A., et al.
Published: (2019-01-01)

Corrosion fatigue of Inconel 625 explosion bonded to nickel alloy steel.
by: Scalzo, John Carmine.
Published: (2012)

Constitutive and fatigue crack propagation behaviour of Inconel 718
by: Gustafsson, David
Published: (2010)

High temperature fatigue crack propagation in Inconel718
by: Sharifimajd, Babak
Published: (2010)

Fatigue behaviour of Inconel 625 produced by Directed Energy Deposition
by: Duarte de Araújo Maciel
Published: (2021)

High temperature fatigue crack propagation behaviour of Inconel 718
by: Gustafsson, David
Published: (2013)

Overload effects on the fatigue crack propagation behaviour in Inconel 718
by: Lundström, Erik
Published: (2012)

Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation
by: Asit Kumar Parida, et al.
Published: (2018-06-01)

Modelling of fatigue crack propagation in Inconel 718 under hold time conditions
by: Lundström, Erik
Published: (2014)

Parameters Optimization for Laser Cladding of Inconel 625 on ASTM A592 Steel
by: Payman Shayanfar, et al.
Published: (2020-07-01)

Mechanical Behavior of Inconel 625 at Elevated Temperatures
by: Mauro M. de Oliveira, et al.
Published: (2019-03-01)

Solidification microstructure of centrifugally cast Inconel 625
by: Silvia Barella, et al.
Published: (2017-07-01)

Precipitates in Additively Manufactured Inconel 625 Superalloy
by: Beata Dubiel, et al.
Published: (2019-04-01)

Fatigue crack propagation in mild steel
by: Abdul-Salam, Ezzet Hameed
Published: (1991)

Research on 16Mo3 steel pipe overlaid with superalloys Inconel 625 using robotized PPTAW
by: Artur Czupryński
Published: (2019-12-01)

Multivariate Regression Analysis Identifying Predictors of Patient Satisfaction with Multifocal IOLs: +4.00/+4.00 vs +3.25/+3.25 vs +3.25/EDOF
by: Bucci FA Jr
Published: (2020-09-01)

Laser cladding of Inconel 625-based composite coatings
by: Damian Janicki, et al.
Published: (2018-09-01)

Microstructural evolution of inconel 625 during thermal aging
by: S. Malej, et al.
Published: (2017-01-01)

Structure and Properties of the Aluminide Coatings on the Inconel 625 Superalloy
by: Adamiak Stanisław, et al.
Published: (2016-01-01)

Corrosion Behavior of Inconel 625 Superalloy in Supercritical Water
by: 黃日鉉
Published: (2009)

Microstructure and chemical composition of Inconel 625 and 686 weld overlays deposited by CMT on 16Mo3 steel
by: Paweł Petrzak, et al.
Published: (2017-06-01)

The effects of the heat treatment on the microstructure of Inconel 625/steel bimetal joint obtained by explosive welding
by: Kosturek R., et al.
Published: (2018-01-01)

Research of the butt joint steel sheet metal that is explosively cladded of nickel alloy Inconel 625
by: Marcin Szmul, et al.
Published: (2017-04-01)

The physical and chemical effects of treating carbon, stainless steel and inconel 625 in low pressure plasmas
by: Rizk, A. S.
Published: (1979)

Studies on the Corrosion Resistance of Laser-Welded Inconel 600 and Inconel 625 Nickel-Based Superalloys
by: Łyczkowska K., et al.
Published: (2017-06-01)

Microstructural effects on properties of additively manufactured Inconel 625 and 718
by: Booysen, Theo-Neal
Published: (2020)

Corrosion Behavior of Inconel 625 Coating Produced by Laser Cladding
by: Mieczyslaw Scendo, et al.
Published: (2021-06-01)

Alumina Reinforcement of Inconel 625 Coatings by Cold Gas Spraying
by: Sergi Dosta, et al.
Published: (2020-09-01)

INVESTIGATION OF CRITICAL HEAT FLUX ON ABRADED INCONEL 625 TUBE
by: Ladislav Suk, et al.
Published: (2020-12-01)

Research progress in evolution of precipitated phases in Inconel 625 superalloy
by: GAO Yu-bi, et al.
Published: (2020-05-01)

Zakres kruchości wysokotemperaturowej złączy spawanych stopu Inconel 625
by: Agata Turowska, et al.
Published: (2015-10-01)

Mechanical and Microstructural Characterization of Arc-Welded Inconel 625 Alloy
by: Daniel Kotzem, et al.
Published: (2019-11-01)

Study on Scale Constitution and Oxidation Mechanism of Inconel 625 in 〝SCWR〞
by: 顏存濱
Published: (2010)

Effects of Cations on Corrosion of Inconel 625 in Molten Chloride Salts
by: Zhu Ming, et al.
Published: (2016-04-01)

Properties of Laser Additive Deposited Metallic Powder of Inconel 625
by: Danielewski Hubert, et al.
Published: (2020-06-01)

Selective laser melting of Inconel 625 using pulse shaping
by: Mumtaz, Kamran A.
Published: (2008)

Fatigue Crack Growth and Mechanical Properties of Inconel 718
by: 林旭宏
Published: (2002)

Microstructure and Microsegregation of an Inconel 625 Weld Overlay Produced on Steel Pipes by the Cold Metal Transfer Technique
by: Rozmus-Górnikowska M., et al.
Published: (2014-10-01)

Effect of dissolved oxygen concentration on the oxide structure of Inconel 625 Ni-based superalloy in supercritical water environment
by: Chang, Kai-Hsaing, et al.
Published: (2012)