A study of the effects of stress ratio and low temperature on the failure of mild steel cylinders

A study of the effects of stress ratio and low temperature on the failure of mild steel cylinders

Bibliographic Details
Main Authors:	Risser, James B., Ousterhout, D. T.
Language:	en_US
Published:	Webb Institute of Naval Architecture 2012
Online Access:	http://hdl.handle.net/10945/14655

Similar Items

A study of the effects of biaxial stress and low temperature on the failure of mild steel cylinders
by: FitzGerald, P. F., et al.
Published: (2012)

Effect of temperature on the fatigue of low-alloy, thick-walled steel cylinders
by: Woodward, M. J.
Published: (1981)

Effects of Stress on the Hot-dipped Aluminide coating on Mild Steel at High-temperature
by: Chih-chien Man, et al.
Published: (2010)

Transient temperature distribution in the end quenching for steel cylinder
by: San-Guay Chen, et al.
Published: (1994)

The effect of elevated temperatures and speed upon the wear of mild steel
by: Dunkley, Peter M.
Published: (1977)

Isothermal Stress-Relief and Stress-Relaxation of Cold-Extruded Mild Steel Rods
by: Adeyemi, M. B.
Published: (1979)

Flow dynamics over a heated cylinder subjected to high temperature ratios
by: Rami Homsi, et al.
Published: (2021-10-01)

The effect of temperature and strain-rate on the deformation and fracture of mild steel charpy specimens
by: Wilshaw, Thomas Rodney
Published: (1965)

The Stress Corrosion Cracking of Mild Steel in Carbonate Solution
by: Marsh, G. P.
Published: (1976)

The stress corrosion of mild steel in sodium hydroxide solutions
by: Humphries, M. J.
Published: (1966)

Fatigue cracking from stress concentration in mild steel
by: Jack, A. R.
Published: (1971)

The stress-corrosion cracking of mild steel in nitrate solutions
by: Henthorne, Michael
Published: (1965)

Effect of mass ratio on flow-induced vibration of a trapezoidal cylinder at low Reynolds numbers
by: Shubiao Wang, et al.
Published: (2021-07-01)

Stress-Strain Behavior of Steel Fiber-Reinforced Concrete Cylinders Spirally Confined with Steel Bars
by: Bambang Sabariman, et al.
Published: (2018-01-01)

Low Reynolds number flow past finite cylinders of large aspect ratio
by: Shi, Yun-Yuan
Published: (1963)

On the Response of a Freely Vibrating Thick Elliptic Cylinder of Low Mass Ratio
by: K. Sourav, et al.
Published: (2017-01-01)

Effect of cylinder gap ratio on the wake of a circular cylinder enclosed by various perforated shrouds
by: Azmi, A.M, et al.
Published: (2021)

Failure to reach the optimal temperature during cryoablation due to refrigerant cylinder problem
by: Narendra Kumar, et al.
Published: (2015-01-01)

The effect of inhibitors on the corrosion and stress corrosion of mild steel in ammonium nitrate solutions
by: Al-Badry, F. S. M.
Published: (1975)

Failure analysis of stiffened and unstiffened mild steel plates subjected to blast loading
by: Fagnan, Julien R.
Published: (2009)

Failure analysis of stiffened and unstiffened mild steel plates subjected to blast loading
by: Fagnan, Julien R.
Published: (2009)

Effect of Ethanol and Sulphur Content on the High-temperature Oxidation of Mild Steel in Moisture Atmosphere
by: Dong Hong Chen, et al.
Published: (2009)

Measurement of stress and defects in mild steel and nickel by magnetoacoustic emission.
Published: (1994)

Thermodynamics and Kinetics of Carbon Dioxide Corrosion of Mild Steel at Elevated Temperatures
by: Tanupabrungsun, Tanaporn
Published: (2012)

Determination of material properties of mild steel at different temperatures and strain rates
by: Vara, Amit Rashiklal
Published: (2014)

Elastic stresses in a rotating thin cylinder subjected to axisymmetric temperature distributions
by: Hooton, D. G.
Published: (1972)

Aided Mixed Convection past a Heated Square Cylinder at Low Blockage Ratio
by: S Moulai, et al.
Published: (2016-01-01)

Inhibition of the Stress Corrosion Cracking of Mild Steel in a Carbonate/Bicarbonate Solution
by: Tems, R. D.
Published: (1978)

Effect of elemental sulphur on the metallic corrosion of mild steel
by: Maldonado, Sigisfredo B.
Published: (1978)

Oxide scale failure during multi-stage deformation in the hot rolling of mild steel
by: RincoÌn, Omar GarciÌa
Published: (2006)

Experimental Research on Dynamic Behavior of Circular Mild Steel Plates with Surface Cracks Subjected to Repeated Impacts in Low Temperature
by: Yang Zeng, et al.
Published: (2020-01-01)

Data showing the effects of temperature and time variances on nano-additives treatment of mild steel during machining
by: Sunday A. Afolalu, et al.
Published: (2018-08-01)

Size Effects in Residual Stress Formation during Quenching of Cylinders Made of Hot-Work Tool Steel
by: Manuel Schemmel, et al.
Published: (2015-01-01)

Effect of Aspect Ratio in Flow Past a Rectangular Cylinder and Tandem Rectangular Cylinders in a Plane Channel
by: Yi-Chiao Wu, et al.
Published: (2010)

The failure of pressurized thin-walled cylinders
by: Gloria, Ruben M.
Published: (1957)

Description of Residual Stresses in Autofrettaged Open-Ended Cylinders Made of High-Strength Steel
by: Sergei Alexandrov, et al.
Published: (2020-06-01)

Effect of stress on recrystallization of low carbon steel.
by: Munly, Richard E.
Published: (2012)

High-temperature Fatigue of Hot-dip Aluminide Coating on Mild Steel and Weldments
by: Bing-Yi Huang, et al.
Published: (2016)

Effect of relative humidity on the fatigue characteristics of mild steel in reversed torsion
by: Odle, James K.
Published: (2020)

Multiple Fatigue Failure Behaviors and Long-Life Prediction Approach of Carburized Cr-Ni Steel with Variable Stress Ratio
by: Hailong Deng, et al.
Published: (2017-09-01)

Cannot write session to /tmp/vufind_sessions/sess_p79jl6oap38thlep7rkj8soslj