Stress concentrations around reinforced circular cutouts in metalite panels in tension.

Stress concentrations around reinforced circular cutouts in metalite panels in tension.

Bibliographic Details
Main Author:	Lieber, James C.
Language:	en_US
Published:	University of Minnesota 2012
Online Access:	http://hdl.handle.net/10945/14613

Similar Items

Transverse shear stress distribution in circular metalite plates.
by: Dole, Charles E.
Published: (2012)

Theoretical design of reinforcing rings for circular cutouts in flat plates in tension.
by: Squires, Lewis Walter
Published: (2012)

An analysis of symmetric reinforcement of graphite/epoxy honeycomb sandwich panels with a circular cutout under uniaxial compressive loading.
by: Sullivan, Patrick D.
Published: (2012)

Testing and modeling of deep beams strengthened with NSM-CFRP reinforcement around cutouts
by: Moustafa Mansour, et al.
Published: (2021-12-01)

Investigation of shear lag in panels with and without cutouts
by: Lachman, Richard H., et al.
Published: (2012)

Design for Buckling Strength of Ring-Doubler Reinforced Rectanguler Plates Containing a Circular Cutout
by: Chia-chi Chang, et al.
Published: (2007)

Experimental Investigation of Vibration of Composite Plates with Circular Cutouts
by: Lin, Shu Yu, et al.
Published: (1995)

Global/local analysis of laminated panels with cutouts and cracks
by: Haryadi, Satish G.
Published: (2014)

The behavior of a metalite plate when subjected to unformly distributed loads acting in the plane of the plate.
by: Robinson, Gerald A.
Published: (2012)

Optimal stacking sequence design of stiffened composite panels with cutouts
by: Nagendra, Somanath
Published: (2014)

Analysis of symmetric reinforcement of Quasi-Isotropic Graphite-Epoxy plates with a circular cutout under uniaxial tensile loading
by: Pickett, David H., et al.
Published: (2012)

Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter
by: Lacki P., et al.
Published: (2015-06-01)

A photoelastic investigation of the effect of cutouts in panels subject to shear and bending
by: Tyra, Thomas Donald, et al.
Published: (1941)

Strengthening Solutions for Deep Reinforced Concrete Beam with Cutout Opening
by: Alireza Bahrami, et al.
Published: (2021-08-01)

Buckling Analysis of Laminated Composite Panel with Elliptical Cutout Subject to Axial Compression
by: Hamidreza Allahbakhsh, et al.
Published: (2012-01-01)

Stress concentration around circular and elliptic holes in wood laminates
by: Langová Nadežda, et al.
Published: (2020-01-01)

Free vibration behavior of laminated composite stiffened elliptic parabolic shell panel with cutout
by: Sahoo Sarmila
Published: (2015-01-01)

What Causes Cutout in Cotton?
by: Guinn, Gene, et al.
Published: (1981)

Hormonal Changes in Relation to Cutout
by: Guinn, G., et al.
Published: (1989)

Free vibration of functionally graded carbon-nanotube-reinforced composite plates with cutout
by: Mostafa Mirzaei, et al.
Published: (2016-04-01)

Experimental study of inelastic stress concentration around a circular notch
by: Long, Kenneth S.
Published: (2013)

The stresses around a reinforced circular hole in a pressurized cylindrical shell
by: Hawk, A. H., et al.
Published: (2012)

Experimental and numerical investigations on overall buckling of steel pipe truss with circular cutout on the compression element
by: Iman Miftahul, et al.
Published: (2019-01-01)

Failure analysis of boron/epoxy composite laminates with square cutouts in various size under uniaxial tension
by: Azmi M.S.M, et al.
Published: (2021)

Impact of Constraint Conditions and Cutouts on Natural Frequency of Glass Fiber Reinforced Plastic Composite
by: Madhav Murthy, et al.
Published: (2018-12-01)

Stress-deformed state in the plane domain boundary angle cutout zone
by: Frishter Ludmila
Published: (2018-01-01)

Effect of Rectangular/Circular Cutouts on Thermal Buckling Load Optimization of Angle-Ply Laminated Thin Plates
by: Topal, U., et al.
Published: (2010-06-01)

A photoelastic investigation of the effect of elliptical and modified cutouts in flat panels subjected to combined bending and shear
by: Hanger, Willard Muirhead
Published: (1943)

A photoelastic investigation of the effect of elliptical and modified cutouts in flat panels subjected to combined bending and shear
by: Gibbons, Robert Martin, et al.
Published: (1942)

An analytical determination of stress distribution in a moment stiffened cylinder with a cutout.
by: Winfrey, John Allan.
Published: (2012)

Investigation of the stress intensity factors at sharp corners of arbitrary cutouts in finite plates
by: Chen, Wen-mo
Published: (2006)

Laminated composite stiffened shallow spherical panels with cutouts under free vibration – A finite element approach
by: Sarmila Sahoo
Published: (2014-12-01)

Stress concentrations around an axisymmetrically attached nozzle on a glass reinforced plastic hemispherical dome
by: Combley, James Harold
Published: (2015)

The effects of cutouts on buckling behavior of composite plates
by: Erkliğ Ahmet, et al.
Published: (2012-09-01)

Applicability of the Vibration Correlation Technique for Estimation of the Buckling Load in Axial Compression of Cylindrical Isotropic Shells with and without Circular Cutouts
by: Eduards Skukis, et al.
Published: (2017-01-01)

The stress-strein state from its own weight in ground base with trapezoidal cutout
by: Agakhanov Elephan, et al.
Published: (2018-01-01)

The effect of cutout on strength of GRP for naval ship hulls.
by: Adams, Kevin MacGregor.
Published: (2012)

Stress distribution around a transverse circular opening through the midspan of a double reinforced beam

Influence of Tension Stiffening on the Flexural Stiffness of Reinforced Concrete Circular Sections
by: Francesco Morelli, et al.
Published: (2017-06-01)

Failure in the Tension Zone around a Circular Tunnel Excavated in Saturated Porous Rock
by: Chiara Deangeli
Published: (2021-09-01)

Cannot write session to /tmp/vufind_sessions/sess_hgvsdhm93892vlkl4jfh1v8oor