Leading edge retraction as a high lift device.

Leading edge retraction as a high lift device.

Show other versions (1)

Bibliographic Details
Main Author:	Doss, Robert F.
Language:	en_US
Published:	California Institute of Technology 2012
Online Access:	http://hdl.handle.net/10945/14374

Similar Items

Leading edge retraction as a high lift device
by: Doss, Robert F.
Published: (1955)

Multidisciplinary investigations of aerodynamic noise from high - lift leading - edge device
by: Rakhshani, Bassam
Published: (2009)

Leading-edge flow separation control for high-lift
by: Sunneechurra, Kailash
Published: (2010)

Acoustic and aerodynamic properties of aerofoil leading-edge high-lift geometries
by: Andreou, Christodoulos
Published: (2009)

Optimisation of a novel trailing edge concept for a high lift device
by: Botha, Jason Daniel Michael
Published: (2015)

A High-Lift Optimization Methodology for the Design of Leading and Trailing Edges on Morphing Wings
by: Charalampos Themistokleous, et al.
Published: (2021-03-01)

Leading-Edge Velocities and Lifted Methane Jet Flame Stability
by: W. Wang, et al.
Published: (2010-01-01)

Minimum drag due to lift for a delta wing with sonic leading edges
by: Strand, Torstein
Published: (1954)

An empirically-based model for the lift coefficients of twisted airfoils with leading-edge tubercles
by: Zao Ni, et al.
Published: (2018-04-01)

Leading Edge Device Aerodynamic Optimization
by: Marius Gabriel COJOCARU, et al.
Published: (2015-12-01)

COMPUTATIONAL SIMULATION OF A HIGH LIFT DEVICE FOR DRONE
by: PrasanthMurugan, et al.
Published: (2018)

Analysis and Design of a Leading Edge with Morphing Capabilities for the Wing of a Regional Aircraft—Gapless Chord- and Camber-Increase for High-Lift Performance
by: Conchin Contell Asins, et al.
Published: (2021-03-01)

Tunable transmission of quantum Hall edge channels with full degeneracy lifting in split-gated graphene devices
by: Katrin Zimmermann, et al.
Published: (2017-04-01)

Increase in high-lift devices efficiency of swept wing
by: Yu. S. Mikhailov
Published: (2020-12-01)

Design and Fabrication for Modular High-lift UAV Device
by: Bo-Cheng Huang, et al.
Published: (2015)

Methodology for the design of leading edge devices applied to variable camber
by: Lajux, Vincent
Published: (2008)

Methodology for the design of leading edge devices applied to variable camber
by: Lajux, Vincent
Published: (2007)

A study of high lift aerodynamic devices on commercial aircrafts
by: Swamy Naidu Venkata Neigapula, et al.
Published: (2020-09-01)

Lifting Off Spatial Degeneracy of Functions, Where Does It Lead Us for Photovoltaic Device Systems?
by: Akira Ishibashi, et al.
Published: (2020-10-01)

Two-Dimensional Shock Sensitivity Analysis for Transonic Airfoils with Leading-edge and Trailing-edge Device Deflections
by: Henry, Michael Maier
Published: (2014)

Investigation at low speed of a six-percent thick symmetrical circular-arc airfoil with leading edge retraction in combination with nose slot.
by: Birdwell, Carl
Published: (2012)

Investigation at low speed of a six-percent thick symmetrical circular-arc airfoil with leading edge retraction in combination with nose slot
by: Birdwell, Carl
Published: (1955)

Lift increase obtained with boundary layer suction on a 10% double wedge airfoil with a 20% chord leading and trailing edge flaps
by: Davidson, Harold William
Published: (1951)

Examination of three candidate technologies for high-lift devices on an aircraft wing
by: Knepper, Angela Marie
Published: (2006)

Examination of three candidate technologies for high-lift devices on an aircraft wing
by: Knepper, Angela Marie
Published: (2005)

Design and Analysis of a Hood-Lifting Device
by: Cheng-Shing Wu, et al.
Published: (2009)

An Edge-Sensing Predictor in Wavelet Lifting Structures for Lossless Image Coding
by: Ömer N. Gerek, et al.
Published: (2007-02-01)

An Edge-Sensing Predictor in Wavelet Lifting Structures for Lossless Image Coding
by: Çetin AEnis, et al.
Published: (2007-01-01)

Compressor leading edges
by: Goodhand, Martin
Published: (2011)

Leading edge stall
by: Chan, Kwan Yee
Published: (2011)

Implementation of the High-lift Devices on a Small Vertical-Axis Wind Turbine
by: Chi-Chih Lin, et al.
Published: (2013)

Operation Risks in Lifting Tasks: Manual Handling vs. Multi-mode Lifting Device
by: Li-YingLee, et al.
Published: (2018)

Jet noise of high aspect-ratio rectangular nozzles with application to pneumatic high-lift devices
by: Munro, Scott Edward
Published: (2006)

Integrated AGV and the lifting device for Mobile Manipulators
by: TSOU, WEN-HSIEN, et al.
Published: (2019)

Theoretical justification and modeling of crane lifting device
by: Sladkova L.A., et al.
Published: (2020-09-01)

Risk assessment and «Safety culture» lifting devices
by: Prusov A.Yu.
Published: (2019-09-01)

Design of Lifting Device of Prevent Falling Chair
by: JHANG,JYUN-JIE, et al.
Published: (2015)

Living on the edge: regional distribution and retracting range of the jaguar (Panthera onca)
by: G. A. E. Cuyckens, et al.
Published: (2017-09-01)

Living on the edge: regional distribution and retracting range of the jaguar (Panthera onca)
by: Cuyckens, G. A. E., et al.
Published: (2017-02-01)

Reliability analysis for high-lift device based on Copula function and Bayesian updating
by: Jiazhen Feng, et al.
Published: (2018-12-01)

Cannot write session to /tmp/vufind_sessions/sess_f2maj5lic8imc9ogitc5h300lp