Effect of handwheel sizes on the turning speed.

Effect of handwheel sizes on the turning speed.

Bibliographic Details
Main Author:	Viana, Paulo Viriglio Didier Barebosa.
Language:	en_US
Published:	Purdue University 2012
Online Access:	http://hdl.handle.net/10945/14092

Similar Items

Effect of size on handwheels on effort required for rotation.
by: Machado, Joao Botelho.
Published: (2012)

The effect of diameter on the effort required to rotate handwheels used as cranks.
by: Fichman, Herbert T.
Published: (2013)

The effect of the diameter of handwheels used as wheels upon the time required for adjustment.
by: House, James Ottis.
Published: (2012)

The Investigation of Valve Operators' Torque Production Capabilities and Optimal Handwheel Height, Angle, and Opening Technique
by: Al-Qaisi, Saif K.
Published: (2013)

The effects of radius of arc of turn size, speed turn rate, and angle of turn upon the accuracy of a turn onto a runway in a simulated air traffic control task /
by: Wachsler, Robert Allen
Published: (1958)

Effect of Shift in Speed Turning on Machined Surface Quality
by: Pavel Polák, et al.
Published: (2017-01-01)

The turning speed of the truck in dynamic simulation
by: Shih-hong Chang, et al.
Published: (2009)

The effect of running speed and turning direction on lower extremity joint moment
by: Lee, Ki-Kwang
Published: (2012)

Modeling of Vibration Behaviors of Turning Machining with the Constant Surface Speed Effect
by: Muhamad Aditya Royandi, et al.
Published: (2021-09-01)

Investigation the Effect of Speed Humps on Merging Time of U-turn Traffic
by: Jalal Al-Obaedi
Published: (2019-03-01)

Efficiency analysis of the speed turns in the crawl stroke swimming.
by: Savchenko M.I., et al.
Published: (2011-02-01)

Investigation of Conductivity Modulation and Turn-on Speed for ESD Protection Devices
by: Ruei-Cheng Sun, et al.
Published: (2016)

Active Gate Driver and Management of the Switching Speed of GaN Transistors during Turn-On and Turn-Off
by: Mamadou Lamine Beye, et al.
Published: (2021-01-01)

Stereo vision For the Measurement of Turning Tool Size
by: Geng-Hao Ping, et al.
Published: (2013)

PCBN Performance in High Speed Finishing Turning of Inconel 718
by: José Díaz-Álvarez, et al.
Published: (2018-07-01)

Effect of cutting fluid and spindle speed on surface hardness in turning AISI 4140 steel
by: Iswanto Iswanto, et al.
Published: (2020-12-01)

The effect of changes in depth of cut and cutting speed of CNC toolpaths on turning process performance
by: Jarosz Krzysztof, et al.
Published: (2018-08-01)

The Effect of Different Turn Speeds on Whole-Body Coordination in Younger and Older Healthy Adults
by: Fuengfa Khobkhun, et al.
Published: (2021-04-01)

Mass enhances speed but diminishes turn capacity in terrestrial pursuit predators
by: Rory P Wilson, et al.
Published: (2015-08-01)

Predicting flank wear in finish turning using spindle speed change
by: Kaye, John England
Published: (2014)

An Empirical Study of the Influences of Voltage Regulator on the Turn-On Speed of Vehicle Alternator
by: Huang, Yu-feng, et al.
Published: (2008)

Safety and mobility effects of installing speed-humps within unconventional median U-turn intersections
by: Usama Elrawy Shahdah, et al.
Published: (2021-06-01)

Effect of feed, speed, and depth of cut on the dimensional accuracy obtained for a workpiece turned on a lathe
by: Ziada, Hassan Higazi
Published: (2011)

Burst muscle performance predicts the speed, acceleration, and turning performance of Anna’s hummingbirds
by: Paolo S Segre, et al.
Published: (2015-11-01)

Chemotactic drift speed for bacterial motility pattern with two alternating turning events.
by: Evgeniya V Pankratova, et al.
Published: (2018-01-01)

Study on the Stability of High-Speed Turning Braking Based on the Hardware-in-the-Loop Test
by: Jie Lu, et al.
Published: (2018-01-01)

Investigating the relationship between energy expenditure, walking speed and angle of turning in humans.
by: M A McNarry, et al.
Published: (2017-01-01)

Analysis of the efficiency of traffic lights turning red in case of exceeding speed limit
by: Heriberto Pérez-Acebo, et al.
Published: (2021-02-01)

Influence of cutting speed on coated TiCN cutting tool during turning of AISI 316L stainless steel in dry turning process
by: Ali A.Y, et al.
Published: (2019)

Effects of Door Width and Human Body Size on Walking Speed
by: Jetthumrong Siwalee, et al.
Published: (2016-01-01)

Analysis of chip geometry and surface roughness at low speed turning in various commercial steels
by: Mudjijanto, et al.
Published: (2018-01-01)

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds.
by: Takeshi Yamaguchi, et al.
Published: (2017-01-01)

Heterogeneous T cell motility behaviors emerge from a coupling between speed and turning in vivo
by: Elizabeth R Jerison, et al.
Published: (2020-05-01)

Surface Roughness and Residual Stresses of High Speed Turning 300 M Ultrahigh Strength Steel
by: Zhang Huiping, et al.
Published: (2014-03-01)

Sustainable High-Speed Finishing Turning of Haynes 282 Using Carbide Tools in Dry Conditions
by: Antonio Díaz-Álvarez, et al.
Published: (2019-09-01)

Definition of the shear angle of chip at ultrasonic vibration turning by means of high speed video camera
by: M P Kozochkin, et al.
Published: (2010-09-01)

Evaluation of Section Speed Enforcement System Using Empirical Bayes Approach and Turning Point Analysis
by: Jisup Shim, et al.
Published: (2020-01-01)

A Constant Speed Changing Rate and Constant Turn Rate Model for Maneuvering Target Tracking
by: Guan Zhai, et al.
Published: (2014-03-01)

High Speed Finish Turning of Inconel 718 Using PCBN Tools under Dry Conditions
by: José Luis Cantero, et al.
Published: (2018-03-01)

HIGH SPEED CUTTING TOOL SURFACE MORPHOLOGY WHEN TURNING BT20 TITANIUM ALLOY
by: Mr. Vladimir A. Kim, et al.
Published: (2016-06-01)